Duophony Parallel Blender: Basic Operation

preview_player
Показать описание
A walkthrough on the Duophony, the stereo parallel blender pedal. Stereo speakers or headphones are recommended for best content experience.

0:00 Opening
0:14 Introduction
0:48 Overview & I/O
1:56 Mix Control
3:06 Clean Signal Control
3:41 Gain Control
4:21 Modes
6:13 Parallel / Series Routing
7:07 Preset System
7:57 Example Applications
8:00 Blending Reverb & Delay
8:19 Blending Overdrive & Fuzz
8:58 Blending Preamps (Stereo)
9:46 Blending Filter & Fuzz (Bass)
10:46 Blending Filter & Fuzz (Bass)
11:26 Wet-Dry-Wet Routing
11:37 Pedal Resetting
12:35 Firmware Update
Рекомендации по теме
Комментарии
Автор

I VERY MUCH hope one day GFI implements a FW update for the Duophony, to allow users to flip the loops order in Series configuration. This will make Duophony the uber-ultimate effect loop switcher/mixer/blender on the market. This is VERY important to be able to change the loops order. I hope there are no technical hardware limitations to implement this.

silentguitarplayer
Автор

Awesome pedal, nice work gfi system'...

RUMAHREKAM
Автор

Awesome piece of equiptment. Ordering mine!

dirkk_guitar
Автор

I have a couple questions.
- Will you be updating the firmware in the future to include a random slope LFO waveshape?
- Would it be possible to update the pedal to work completely independently on L/R channels? Specifically with LFO control in mind. My ideal scenario would be hooking 2 stereo effects up together, then randomly panning mix between them on both l/r independently. Thus you get random panning that is not syncd together on L/R (going the same speed would be fine).

TriPedalReviews
Автор

what happens if I were to put this in a parallel effects loop in an amp?

MatthewSwasta
Автор

Hi there! Is gain on send or on return? Can i leave one loop pedal in Y, a recorded loop for example on my Boss RC.1, and take off the channel? Is possible to have trails when a channel is muted, or in general does each channel have trails? Thanks!

federicouffreduzzi
Автор

Such a great pedal!
In wet/dry/wet, can this be used with an expression pedal or something to mix a dry signal with a wet, or send a wet effect to a dry one?
Image like wet/dry/wet to wet/mix/wet or mix/dry/mix.

natsume
Автор

I love this pedal!! Can you add a link to the firmware update page please? Thanks.

rogerloydmccoy
Автор

Question about stereo panning - say you hard pan Loop X to the right and Loop Y to the left, can you set up the LFO to move the two loops back and forth across the stereo field? So, Loop X goes "R -> L -> R -> .." and Loop Y goes "L -> R -> L -> .."?

RipIPDime
Автор

ahh, SO close to what I need for my application. any chance this will ever be able to blend a small amount of the X return into the Y loop while in parallel mode? my goal is to have 100% wet signal for W/D/W with reverb on the repeats of delay.

qiuz
Автор

Will this work for stereo.? 2 amps. And can you only split 2 pedals at a time? Ty!!

randym
Автор

Is it possible to add a variable low pass filter in a future update for us bass players ?

dscapes
Автор

Is there a way to have independent control of the level of each loop? For instance, if I want the mix of loop x to be 60% and loop y to be 85%, is that possible?

lachlanplache
Автор

is it necessary to use two or more amps or can this still be useful in a one amp setup?

teedzay
Автор

can it do Y + X too in series through the pedal or need to repatch the pedal??

Banoffeeee
Автор

If this is what you’re doing with line mixers then just imagine what you could produce if you put your minds into a midi loop switcher…

tompoynton
visit shbcf.ru