How to Replace Hydraulic Engine Mount 2007-2013 Acura MDX

Buy Now!

This video shows you how to install a new engine mount on your 2007-2013 Acura MDX. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.

This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• 14mm Deep Socket
• Engine Support Bar
• Bent Nose Pliers
• Swivel
• Pole Jack

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money

[tomle]

Is this procedure similar to the 2013 RDX J35 V6 engine? Saw a another video mentioned on the 2018 (I believe same engine) that the radiator and fan needed to be removed? Also don't recall him mentioning anything about removing bolts below the car either.. I could be wrong though.

[tsw]

Hi, just notice a noise and vibration on the passenger side, not sure if it’s the motor mount. does a bad motor mount affect your wheel alignment or steering wheel being not center? Thanks

[jaysone]

How do you know when they're going bad? I'm getting a clicking sound in my driveline when shifting from park to drive or into reverse. Basically anytime the engine moves forward or backward and I'm not sure if it's an engine mount(s) or maybe an axle. Thanks.

[orangeskky]

Do you have video or instructions for the rear mount on same car? I need to replace front and rear.

[trentonmichael]

Great video I used it to do mine but I forgot about the steering shaft and I need a new knuckle lmao maybe I went down too far

[sanchezfran]

Did everything n my lower radiator hose blocks it, 2012 mdx 🤷🏽‍♂️