How to use the Chauvet D Fi Hub

How to set up your D-Fi Hub with your Freedom Par Hex 4. If you have trouble understanding the manuals and are trying to use Auto check out this video for easy set up.

[thejerzinator]

This is exactly the video I needed 😂 thank you, Rob!

[stephenkamin]

Just to clarify what you missed... the channel you are setting on the D-FI and in the S-tr menu is only for COMMUNICATIONS between the Dfi and the light via wireless control only! You can and will still need to go thru the menu on the light and set the DMX channel to any number between 1and 51x for control from the Obey Light controller. The example that is used in this video is using DMX ch 1.

[djfingersflores]

good video parisi ... keep rockin' steady in the free world DJ .

[PaparazziEntertainment]

Wow i had the same equipment except freedom par quad 4 fixtures i stopped using this got lazy and just use the remote but i was looking to set this up again thanks... saved me a lot of time will try mydmx GO next week when i get it for now this is cool thanks again

[DIE-DEEJAYWG]

Hello,

and thank you for the explanation. How does the thing look when multiple devices are connected. In my case it would be 8 Freedom Sticks. So that each stick does not do the same, must be addressed here. How do I go about this?
Thank you very much.

[rothj-tbvs]

Say if i want to add more uplights, im assuming i have to set the other lights to the same number as the d-fi hub and the 1st light? I had it set the same way and after running the faders its not changing any colors on the second light.

[khaleefd]

You're going from the Obey 6 DMX Out to the Hub's DMX In correct?

[luiscano]

Can you connect these to cold sparkles?

[ArvelBird]

Ok, now I noticed that you didn't connect the Hub to the Par, so it must be connected to the Obey 6? I have the Obey 40, Hub and 5P HEX and the Slim PAR H6. Still trying to figure it out.

[ArvelBird]

You didn't mention the actual hook-up of the dmx cables. I'm guessing you ran a cable between the D-Fi Hub and your light, correct?

[aaronlutchman]

If I have a few of the chauvet Ezpar 64, could I use the D-Fi to run them for wireless DMX? If not, what can I use?

[shanewatson]

I been told you don't need to use the flarecon as this is built in the obey 4 d fi

[kellycorno]

Can the transmitter be connected to a computer running show express?

[robshawver]

You know you can make any light in the Freedom Wirelss series the Transmitter connected to a console with DMX and the rest of the other lights wireless recievers and you don't need a seperate D-FI

[willoneil]

Can I use the D-Fi with SlimPAR 64'S?