How to Replace and Program 07-18 Jeep Wrangler ABS Control Module Code c2200 c121c

In this Video I show you How to Replace the 2007 thru 2018 Jeep Wrangler ABS Module and program it yourself.

Mopar 68030936AB

Royalty Free Music Provided By Epidemicsound

Contact Me At:

________________________
DISCLAIMER

Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
As an Amazon Associate I earn from qualifying purchases.
(paid link)

________________________

#TheLateModelTech

[ddelarosasr]

THANK YOU!This was the fix for my 2012.I purchased the touch screen Launch X431 CRP EBT Elite it worked Perfectly.I had two mechanics tell me the dealer had to flash it.This tool worked seamlessly.I can't say my jeep is a POS It has 165k and my wife's has 200k still going places most vehicles can't.

[robcaldwell]

Hey buddy. Just wanted to thank you much! I followed your directions and bought the Launch. Feels great to do things myself and save money. The only challenge I had was figuring out how to release the tabs to pull up on the connector. Watched another youtube for that. This has been driving me crazy for a year and I finally fixed it with your help! Thanks again!!!

[beaubuchheit]

@Donny The Late Model Tech. Wanted to give you a huge thank you for this video. I replaced the ABS Module (used/rebuilt) in my 2016 RAM 1500 and had to reprogram it. I bought a Launch X431 CRP919E Elite from Amazon and followed your steps. Saved me $$$ and time. Thank you sir!

[JamesDavidCaldwellJR.-eldg]

Thanks for your help with the video. I have a 2016 JK and had to replace the pump as well because the electrical unit is currently indefinitely unavailable through Mopar. When I installed the Full ABS unit the traction control light remained on ams the cruise was disabled. I bought the Launch unit (keep in mind that Launch USA does not take questions on nor service models bought on Amazon or Ebay) similar to yours and after running the initialization program the traction control light went off and the cruise works. I also bought the used module with my VIN pre-programmed. The scan tool at first recognized the used VIN and would not re-write the new VIN, but when I ran the initialization my VIN magically appeared on the updated ABS unit. Still have to bleed the unit as my brakes are softer but good for the moment.

[justsomeguy]

What feature does your scanner have to have to reprogram the vin for the abs module

[Epicfunk]

Did you try just reprogramming in old module to see if that works?

[FireePops]

Trying to replace the module on my 14' Wrangler, and i can not find it anywhere because it's discontinued. Where did you purchase yours from? Or do you have any other suggestions?

[kylehatfield]

Thanks buddy! Replacing one tomorrow on a 2015 jeep, hoping the used ethos scanner I bought will work. If not I’ll buy this scanner through your page.

[frenchcurse]

yeah i love this video u teatch me alote thank you for ur time

[TrueWarOutside]

Hey I got a 2010 Jeep wrangler unlimited Sahara. I checked online to see if the part number will be the correct fit for my jeep but different online mopar sites say it doesn’t fit. I’ve been looking for a year trying to find the right part so I don’t mess up my jeep and waste money. I just want to know if it fits and works fine for your ‘08, you think it will do the same for my ‘10?

[csfabrication]

Great video, did you have a VIN discrepancy before or during the initialization? I am currently getting that IDK..

[SevinDeadlySins]

Did you the leave the scanner plugged in while you were driving around? My BRAKE light comes on intermittently, so this will need to be done soon for me. And can I use the LAUNCH to program a instrument gauge cluster?

[not-AI]

Is this for a brand new replacement? I can't find new but I can see used ones. Can you reprogram a used one?

[iceburg]

I used the link and bought the exact same launch unit and all my options are different. Doesn't say 16 pin connector, no where does it have special features. Are there updates i need to pay for?

[sheerwillsurvival]

Excellent video 👊🏻👍🏻 Iam sure mine will go out eventually

[sstjacques]

I have Autel bidirectional scanner that I need to do this on, thanks, part looks easy to swap.

[CityMotorsllc]

Can you use a used module? If so do you need the vin to the donor?

[huntertrahan]

can you program all of the modules if anymore become an issue?

[TheBlakeFlowers]

Will this work with a used one, mine went out and could only get a used one

[tonyshannon]

Donny, which model of the Launch scanner are you using?