How To Tow With Kubota BX23S or BX25D (With Backhoe Installed) - No.35

Towing with Kubota BX23S or BX25D. How to tow with BX25D or BX23S. See how I will tow trailers using my Kubota BX25D with backhoe installed. I have a combination of Heavy Hitch (KPH2-O), Curt Adapter (45797) and Curt Extender (45796) to achieve the desired result. I used a factory hole in the backhoe bed-plate to pick up some of the perceived tongue weight. Check it out and let me know what you think!

Please like, share and subscribe!

Let's Have Fun Outside While We're Killing It Country!

For partnership opportunities or to have your product reviewed on our channel please contact us using the information below. We'd love to hear from you. Thank you for your support!

Disclaimer: This is an entertainment channel and the content I upload is not professional advice. The content of this video is my personal opinion and not that of my employer(s) or partners. Use of the information contained herein is at your own risk. The content creator for this channel (Killing It Country) will not assume any liability for any direct or indirect losses or damage that may result from the use of the information contained in this video including but not limited to economic loss, injury, illness or death.

#killingitcountry #kubotacountry #outdoorchannel #2tonbiglildumper #acreage #argo #backhoe #berkelmanswelding #boat #breakingtrail #bush #bx25d #canada #camp #campfire #camping #chainsaw #country #countryliving #countrymusic #develop #DIY #dji #doityourself #dumptrailer #environment #family #fel #forest #forestry #fun #garden #gardening #generator #gopro #homestead #homesteading #hunting #implements #johndeere #killingit #kubota #kubotabx #kubotabx23s #kubotabx25d #kubotakx #kubotakx040 #land #lawncare #lawnmower #lawn #lumber #machinery #maintenance #megagarden #mow #nature #natural #oilchange #ontario #organic #outdoors #outside #preventativemaintenance #productreview #property #quickattach #resources #ridingmower #rural #selfreliance #selfsustaining #snowblower #snowblowing #softwood #stihl #subcompacttractor #sustainability #sustainable #tractor #trails #trees #wildlife #wood #woodchipper #woodlandmills #woodsplitter

[CorkeryCoop]

This solves the same problem that I have; pulling a trailer with the backhoe on! Thanks for the idea!

[dannelson]

I like it, may be able to load into a small trailer behind the bota- going to have to steal this idea from you! I haven't liked any of the other tow solutions I have seen but I think this one is the ticket.

[BrutusTJustice]

Great idea.I think the setup will be more than strong enough to handle a trailer load that doesn't exceed the bx itself.Nice job.That's going on my implement list.

[bradbosland]

Thanks as always for making these videos.
I did the same hookup for my BX25DLB for my trailer but did not think about the threaded rod and spacer sleeve - That will be my next thing to do before heavy summer use!
Thanks again. 🙏

[OrangeismyNewGreen]

Great idea and the sleeve will also help 👍🏻

[edwardmartin]

Thank you for your reply
I have purchased BXPANDED belly guard pan and their ripper tooth and their fast hitch for the BH
GREAT SERVICE AND PRODUCTS SO FAR
I too try to find ways to make our BX25D more fun to work and play with
My son just got a used B3000 with a FEL and a full cab which will help out a lot
Enjoy and always be safe
Talksoon
Edward

[edwardmartin]

Great video again
How about BXPANDED TRAILER HITCH FOR THEE BUCKET ON THE BACKHOE

[smeefamily]

Great plan. I will defiantly look at it this summer.

[peterkober]

James that is a great idea now must wait till in action
God Bless All
PaK

[matthewhayes]

how much would you happily tow with your BX without worrying about damaging the transmission etc?

[johnburdell]

That’s a great idea imo… the the thicker the sleeve used for the threaded rod the better. I would suggest using square stock to get the best surface contact. Awesome idea and I’m thinking of getting the same tractor. You just helped answer a question for me thx

[mochouinard]

I'll have to come up with something similar for my TYM T25. That said, I would add some sort of strap that get more closer to the backhoe. It seem pretty far still and act as a lever point, and that single bolt would end up taking a lot of the load. Had any issues in the 2 year you done this ?

[tacticalchef]

I welded up a 2” receiver adapter that my forks slip into. It works but you are really pulling backwards. This project looks easy and is now added to my “to do” list.

[davidfurlong]

Do you have any videos of it in operation under load? I see you have a grapple on. Would you load it up if the trailer had lots of tongue weight? I can see this working for me. 😁

[robertmcgreevy]

love this idea!!! just ordered the parts for my bx25d

[joshroten]

I like it for smaller/lighter trailers.

[peaceriverpowersaws]

I welded a 6" receiver to the base the hoe. It will never bend because of length. You can swing the hoe to either side and thereby "OFFSET" whatever you're towing if necessary.

[eletourneau]

There is a backhoe 2 in receiver that BX expanded makes.

[AD-hris]

Remember how your trailer with the water in it and when you dump it lifted the back of the tractor well now youre front end is going to be lifting when you have a heavy load in the back. Leverage point is way too far. You will need front weight now. Im 60 and been around.

[kaseycasece]

SEEN, TO ME BENT TO FAR UP, UNDERNETH BACKHOE