Easiest Way to Add Fluid to MTB Hydraulic Disc Brakes | 4k

Fastest and easiest way to add Fluid (Mineral Oil) to Bicycle Hydraulic Disc Brakes!

[gonzalom]

Last time my mechanic charged me 60€ for this. Thank you for saving me from another scam. Great video and easy to understand! 💪

[circuspony]

Nice to finally see somebody demo a partial brake bleed or simply adding fluid. A full bleed may NOT always be necessary. I will try this "add" method on bike this weekend. Thanks!

[robiveevee]

I saw your video over a year ago and said "i better get that bleeder kit", well today i finally needed it, and your instruction worked perfect, I love it !!! thanks for the hack !

[keithjames]

Excellent demo, staight to the point without needless bullshit

[teenafithian]

Thank you. I’m going to try this. Update: We did both of our Mountain Bikes and it worked great! Saved us $$. Thanks again.

[michaelmccafferty]

Straight to the point, no bullshit with syringe….great video

[marshallschmitt]

Worked perfectly. I read an article and out advised to tilt the brake 45 degrees forward squeeze the brake untried bubbles stop then 45 degrees the other direction repeat until bubbles stop and then back to highest position and finish. I did have additional bubbles come up at the 45 degree tilts.

[official]

been searching for over 3 days now and finally a guy that can actually explain it and that doesn’t cost over $100 for a bleed, thank u, this was so easy to understand

[trangoadvisory]

This took all the intimidation out of bleeding brakes for me. I'd rather pull the brake lever then mess around with all that other stuff in the package. Thanks for the great tip! Oh and PS, my issue was created by the exact problem you described except I loaned the bike to a friend and that's how it came back.

[amygibbins]

Thank I just bought a second hand bike online and it came with the front wheel off, finally managed to get it back on with the pads left closed together and had no idea why the break wasn't working!! I feel calm again haha

[davidbrooks]

Did this technique a couple of weeks ago. Worked like a charm.

[stevendennis]

Did it as he describes and it worked! Thanks "Bad Boy", you saved me grief and money by not going to a bike shop!

[sabeehbigboii]

easiest tutorial I was looking for and this is the easiest one I found!. cheers mate

[cadencherry]

I was a beginner to mountain bikes, and at the beginning I decided to put dot three brake fluid in it and guess how that turned out not good bottom of the brake line these tips worked thank you

[AI_Dave]

Your weather makes me wanna cry. Great tutorial, also light and funny!

[johnreese]

Judging from the condition of your grips, you could do a crash and burn video! Great info, thanks!!!

[selmerd]

Worked like a charm. The best part is leaving all the extra stuff in the package and never using it! And it does take some persistence and a lot of squeezes. And jostling the bike a little, which dislodged some of the air bubbles I guess, but gently so the oil doesn't slosh out of the funnel.

[macfin]

Thank you so much for this. Ive been wondering why the hell i need to drain all the oil from my brakes when they're just a little spongey. This is a great solution

[paulhebard]

My new favorite repair expert (?) To the point, with humor. Works for me;)

[jamiewilliams]

As stated below, was looking for a top up video and not a full break bleed, nicely done !!!