Graco X7 - first time use

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Make sure your fittings are tight and run at least 10 gallons of water through the hose and the waste line to Swell the gaskets. they are made of cork and paper and need to swell to seal .. totally normal ! then run paint and it will never do it again as long as you keep liquid in it. put pump armor in it while in storage

carstenwessel
Автор

Why are u trying to put down Graco sprayer
Sometimes it comes with fabrication defects all you have to do call customer support they will send you brand new hose with some credits
Customer service is very helpful and good

Peace bro💪🏿

pantrokrator
Автор

You can easily avoid this (& having to buy more hoses), If you'd just...READ, THEN THE INSTRUCTIONS in your manual. 🤷🏾‍♂️🤷🏾‍♂️

keithjordan
Автор

Perhatikan dengan benar sebelum komentar. Jika tidak salah lihat, disitu jelas ada kebocoran pada selang bukan pada sambungan hex adapter, tapi pada selang tepat sebelum adapter. Mungkin dari pabrik kurang kuat saat pengepresan.

ericktan
Автор

Everyone commenting on the tightness of the fitting need to check their eyes. The leak is coming from behind the fitting and clearly leaking from the hose side. So, in this case, no amount of tightening will make a difference.

Bob-o
Автор

It’s either too tight or not tight enough

Clear-consciousness
Автор

First time using this sprayer same thing happened. Is there a fix for this crap?

JohnDrach-ii
Автор

Alguien me podria decir si con una maquina como esa puedo usar stain? Y si se puede con qué se limpia? Gracias🙏

MedinaDelCampo
Автор

So is this machine good or not a good tool??

jeanbriones
Автор

If you had been watching the Idaho Painters channel, you would have used WD-40 on that connector and tightened it with a wrench

jag
Автор

Did u buy it at home cheapo? That’s why, it’s not the same Graco

sonwasup
Автор

Rell me your a beginner without telling me you are a beginner 😂

DanielG-yzyz
Автор

So much paint is wasted?
And what’s the learning curve - for real ?

glowilk
Автор

Mine did the exact same thing today. Looking like a new hose. What’s another $80? Lol

DaddyParton
Автор

Was it tightened by hand or with a wrench?

Ariceater
Автор

Same thing happened to me I only used it three times at best

Ethan-Hark
Автор

Tengo una que escapa pintura por debajo me puedes ayudar 😊

AntonioReyes-oxfo
Автор

Yeap it happens . MOVE ON 😂😂😂🎉🎉🎉 or get a new hose 😮

davidsaucier
Автор

As grandpa would say, "That don't look right."

Igotstaknowit
Автор

Its not pushed in all the way. Thats all.

kfondoxv