1 bulb 3 switches diagram @JrElectricSchool

In this video we have shown you how to control a lamp and any load from three places. you need three 2 way switch for this circuit.
What is the difference between 2 way and 1 way switch
the 1 way switch has two contacts and the 2 way switch has three contacts in a 2 way switch there are two 1way switches combined in one one of the terminals can be connected to either of the two but not both at the same time.

THANK`S FOR WATCHING..........

[donaldtheroux]

Line wire should never go to the case on the bulb. It belongs on the center terminal. This diagram is wrong and dangerous. Neutral wire always goes to screw casing of bulb.

[dangdang]

This doesn't work if you want to be able to turn the light off. The RH switch powers one line and the middle switch powers the same or the other line...so the LH switch may not be able to turn the light off, and the middle switch certainly can't.

[thereincarnator]

The circuit is wrong, you need an intermediate switch in the middle.
And line should not connect to the case! Dangerous.

[brendenvlog]

Already tested its probably not working you need 4 switches or 3 way switch it will work

[oseasrodriguesdesa]

Muito bom mesmo Obrigado professor. Valeu.

[MARGARITO]

No esta bien el ciercuito se necesita un switch de 4 vias y 2 de 3 vias

[neilmclean]

If switch left and right ar both up or both down. Middle switch cannot switch light off.

[tayfunertan]

BU SİSTEMİN ÜÇ YERDEN AYRI AYRI ÇALIŞMA ŞANSI YOK.

[ahmedhussain-tdyi]

this is rong. Middle switch need use intermediate switch.

[danielteyehuago]

Please drawing it is not enough but you have to show the operations too

[christophersheppard]

I won't be asking you around to wire my house. This circuit will not turn off. Haven't you heard of an intermediate switch? It is also extremely dangerous, you are going to liven the frame of your light fitting. Suggest you stick to picking apples.

[stevebell]

This does not work. If both switches on the right are in the same postpition the lamp is always on regardless of the switch at the left. 😂 And the lamp is wired wrong, the Neutral must be connected to the screw base for safety. These posters don’t know what they are doing. Danger. Stay away.

[MdAlaminHossen-wfwf]

ভিডিও টা ডিলিট দিয়ে কাজটা আগে নিজে শিখে আবার নতুন করে কাজটা আপলোড করেন

[sykanderpillai]

Useless connection. If you switch on in one switch, you will have to come to the same switch to switch off.

[blessingjone]

This circuit wrong... light is a not turn off

[pawanmehra]

This is a wrong diagram please remove the video from you tube

[fun-irel]

Explain how you turn off the light bulb in this circuit.. 🤣🤣😂

[ImYourProblem]

Oh, nice, a circuit that can't shut off. Look up 4 way switch circuit fool.

[fun-irel]

No good, this is bad work.. This circuit does not require a 2 way switch because the bulb is only turned on by this circuit and cannot be turned off. Explain how you turn off the light bulb in this circuit