Mikrotik - Basic Configuration ( PPPoE, DHCP, NAT, IP LAN )

Показать описание

You have a new Mikrotik router. You should watch this video

0:00 Introduction
0:23 PPPoE Configuration
1:07 Assigning LAN Gateway
1:31 DHCP Server Configuration
2:14 NAT Configuration

#netvn #mikrotik #router #mikrotiktutorial

Рекомендации по теме

Комментарии

Welldone man thanks for sharing the wonderful tutorial.

MrAimalsultani

การกำหนดค่าพื้นฐาน (PPPoE, DHCP, NAT, IP LAN) ของ Mikrotik มีประโยชน์มากครับ

komsuntaisakun

Thanks man for the information.
Can we access Microtik Antenna through IP when it is in bridge mode?
Details -
I have the following setup ISP -> Microtik Antenna1 -> Microtik Antenna2 (at my home) -> Tenda router.
Here at the MA2 level ppp client is configured (ppp username password provided by isp is configured) and it does also have a DHCP server which provides IP address to the Tenda router which further having a DHCP server to distribute IPs to the end users. for this MA2 is in router mode.
I though (please correct me) DHCP server at the MA2 level is unnecessary so what I did I changed MA2 to bridge mode and configured PPP authentication on the Tenda Router.
And I get the internet working but problem is when MA2 is in bridge mode I am not able to connect it via MAC or IP through the Tenda router however when I use ethernet cable coming from the MA2 I can connect through its MAC address.
So my question is, is there any way MA2 can be accessed through MAC/IP from a PC connected to the network through Tenda Router. Thanks.

PratapSinghKsp

Will you also provide quide how to configure band aggregation on Mikrotik SXT LTE6?

marcinchmielewski

Hi, how to connect the Tenda 03 relay antenna with a Mikrotik for wifizone?

eurekalearn

I have one CCR1009 and one RB 3011 and RB 3011 is attached under CCR1009. Now issue is the client request is not going on both the router at the same time. please provide the solution. user authentication request only goes to RB 3011 not to both at the same time.

sandeepaharyan

hello, may I know how to to configure pppoe through vlan?

Jimmylee

May I know how many service providers can using in MikroTik router?

khpopular

Bạn này trước hay làm về cisco, h chuyển qua review cái này là hợp thời đó. Cá nhân mình thấy dùng thằng mik này dễ cấu hình hơn, có nhiều tính năng được tích hợp vào router, đặc biệt là cho phép kết nối từ xa 1 cách dễ dàng. Bạn làm cái kết nối open vpn cài trên con pfsen mà nat port trên con mik đi.

khocviem

Hello, do you have an explanation of how to bypass transparent DNS proxy . i want to use vpn

ferasawwad

Make a video with mikrotik and radius server: vlan, management users, pppoe users and servers . TY!!

bruxadoful

hello please do a tutorial on how to configure PPPoE server for 250 clients with different speed or bandwidth per clients, thanks

joel

Hi I do not know if you can help, I have an app to watch live tv channels, do you know how can I take the m3u url for that channel from the app. Thanks for your help.

HassanHassan-pvih