Taotao ATM150-A Evo scooter - replacement of fuel and vacuum lines

preview_player
Показать описание
In this video, I trace the fuel and vacuum lines after they have been upgraded on a Taotao ATM150-A Evo GY6 150cc Chinese scooter. It's a good idea to upgrade these lines because the stock lines are prone to deterioration within a few months, and a leak could leave you stranded. These lines are high quality Helix vacuum line (blue) 3/16" x 3' and Helix fuel line (red) 3/16" x 3'. Of course, you can choose your preferred color and brand for each. The nice thing about these lines is that they're translucent so you can see if you're getting fuel in your vacuum line and make sure that fuel is flowing in the fuel line.
Рекомендации по теме
Комментарии
Автор

Thank you so much My moped had issues for 3 days now.. It starts then it shuts off.. It was that damn vacuum line.. It was not connected. Just hanging lose.. With your video i finally found out where it goes. Now everything is great. Thanks again

H.EL-Othemany
Автор

Thank u so much I’ve been looking for a video like this

doriancordero
Автор

Thanks so much for sure exactly where the lines run to and which is which sometimes we leave videos to explain the small details this exactly what I was looking for

bigfrank
Автор

so I ripped out my stock air box/filter and emissions and then had no clue what to do with the vac lines n where to run the fuel lines, then I tripped right here to this video..no wait hold the phone..AWESOME VIDEO!!! no I am no longer clueless..Thanks dude for posting this ..

ripclaunch
Автор

Exact video that I needed! Thank you so much !

senecaburr
Автор

Instead of using a splitter can I just run align to the carburetor from other intake port and then one from the petcock to the other intake port

chetcross
Автор

you tube should allow photo comments. i like your videos!! so helpfull!!

Kriswixx
Автор

help remove the petcock and conect a hose straight from gas tank to carb and the scooter start right way but if i stop giving gas it dies

xbillx-ukfj
Автор

will you please please please make a video showing where every fuel and vac line leads to? this is the only high quality set of videos i have found that has the exact same scooter as me. I need to know where the fuel line out the bgottom of the carb goes, how the lines lead to the "pair" system, and the one from the crank case.... or point me in the right driection for the video. thank you

EazzyBeezie
Автор

Excellent tip. Thanks. It's too bad that youtube doesn't have more features like allowing a photo upload with a comment. It would be cool to see a picture of this.

activitycc
Автор

I have a problem with them. The first one was blocked due to non-using the scooter. It was replaced with a new one. Then, the new one was ok for only 2-3 weeks before it gets blocked again, so the fuel can't go to carb. Idk the issue, since that the fuel is good quality.

dzenan
Автор

Hi,
How many feet of hose do you actually need for each line?

shakavirgo
Автор

plz help i have all i need but my carberator dosnt have a port by the throttle cable place and its has only one nipple on the part that holds in the carb.

ashtenzimmer
Автор

If I want to replace all of PVC hoses as you, those PVC hoses does have temperature limit range? Are they special type? Maybe you give some idea, thanks!

hunterchung
Автор

My oil pipe has come off the engine on my ajs 50cc moped and I don't know were it goes bk on to the opposite end of the oil reservoir

davidshapton
Автор

WHERE CAN I BUY THE VACUUM LINES??? PLEASE HELP ME!!

radconserv
Автор

why is the one vac line plugged doesnt that go to egr or can u explain

marcusorcasitas
Автор

So where does the other hose connected to the T go?
It appears to end right above the throttle cable.

rustynuckles
Автор

why did you plug that vacuum hose? did u take off your emissions?

ColombianCasanova
Автор

Where the another line go the way u made it sound was like 2 different ways

davemack