SOLIDWORKS - Let SOLIDWORKS Create your Flat Pattern Configuration

preview_player
Показать описание
Learn about a quick and easy way to automatically create a flat pattern for your sheetmetal parts in SOLIDWORKS by placing a flat pattern view in a drawing.

Quick Tip presented by Tim Roberts of GoEngineer.

  1. GoEngineer
  2. goengineer
  3. engineering
  4. MCAD
  5. mechanical engineering
  6. product design
Рекомендации по теме
SOLIDWORKS - Let 0:02:36

SOLIDWORKS - Let SOLIDWORKS Create your Flat Pattern Configuration

SolidWorks Tutorials - 0:07:53

SolidWorks Tutorials - How to Make New Planes SolidWorks

SOLIDWORKS - New 0:03:24

SOLIDWORKS - New Drawing from Part or Assembly

Basics of Creating 0:08:42

Basics of Creating and Using a SOLIDWORKS Assembly

SolidWorks Extrude Part 0:01:33

SolidWorks Extrude Part of Sketch

Creating a Part 0:03:13

Creating a Part in an Assembly - SolidWorks 2020

Make Drawing from 0:19:32

Make Drawing from Part in Solidworks | Solidworks Drawing

SolidWorks - Tutorial 0:13:33

SolidWorks - Tutorial for Beginners in 13 MINUTES! [ COMPLETE ]

SolidWorks Tutorial Heat 0:32:21

SolidWorks Tutorial Heat Exchanger simulation in #solidworkstutorial #drawing #tips

How and When 0:21:05

How and When to Create New Planes in SolidWorks

SOLIDWORKS Assembly Mini-Series 0:26:19

SOLIDWORKS Assembly Mini-Series │Ep01

SPRING IN SOLIDWORKS 0:06:31

SPRING IN SOLIDWORKS

Solidworks Tutorial - 0:14:40

Solidworks Tutorial - Make a Basic Hinge

Tutorial: Creating SOLIDWORKS 0:29:55

Tutorial: Creating SOLIDWORKS Add-In from scratch (part 1)

Solidworks Sheet metal 0:12:14

Solidworks Sheet metal tutorial Hopper

Multibody Part Design 0:13:45

Multibody Part Design in SOLIDWORKS

Solidworks tip and 0:04:51

Solidworks tip and tutorial -54 | How to make inclined plane reference plane?

SolidWorks Advanced Modeling 0:11:14

SolidWorks Advanced Modeling Tutorial

Creating/Setup of Drawing 0:03:33

Creating/Setup of Drawing template in SOLIDWORKS to make the drafting easier

Creating and Editing 0:05:12

Creating and Editing Design Tables in SOLIDWORKS

How to Stop 0:01:36

How to Stop parts from Moving THROUGH Each Other in SolidWorks (Physical Dynamics)

SolidWorks Tutorial for 0:20:50

SolidWorks Tutorial for Beginners #1

Solidworks Spring Animation 0:11:03

Solidworks Spring Animation | Motion Study in Solidworks

How to duplicate 0:00:17

How to duplicate a part in SOLIDWORKS Assembly

Комментарии
Автор

Thank you, do you perhaps know how to create a non-metal flat pattern in SW? I need to create a silicone extrusion with a oversized pressure/friction fit into an extrusion. I can't seem to find this information anywhere on the SW help or tutorials.

carlabekker
Автор

I don't have a view palette, how can I make it active

Parker
Автор

I just quit a job after 3 days being a design engineer for a very small company that made sheet metal parts. My choice of software to use is sold works. For some reason, the parameters entered into Solidorks for bending allowance did not match the press brake machine. If the flat panel produced by solid works gave a bend line that was 1.112 from the edge of the flange for a required 1.25 flange, the machine would make a part out of spec. For some reason, this press brake required an extra 0.03 takeoff, which seemed odd My question is the bend line given in the Solid works flat pattern the bend centerline, and do press brakes require an additional takeoff on the stop to produce this?

thisworldaccordingtome
Автор

Why do you have the radius lines? Is it possible that they will not be?

MTN_