DIY Brembo big brakes Civic & Integra

In this episode we get the budget brembos on the budget time attack Civic. This is a bolt (with one small adjustment) brake setup for any 5th/6th Gen civic and DC chassis Integra running 5lug.

Brembo caliper: 2010-2016 Hyundai Genesis Coupe Track front calipers.

Rotors: 2017 Nissan Rogue w/3rd row seat

Hope this is useful to everyone

[phrzy]

after getting into a collision with my GSR with stock brakes, i needed to upgrade to something better for my brake setup. This video helped out a lot

[bighomieJX]

Wow, this brake setup is by far the easiest one ive seen 💯

[Zubawoo]

My man! you just saved my from drilling holes on My rsx! MVP right here

[jwein]

Any word on installing Brembo calipers on the rears?

[oscarkenji]

this setup will fix into 16 inch wheels? good work!

[cder]

What size wheels are you running?
Whats the minimum size required?

Thanks,

[PeterTron]

Would you know the clearance on wheels if I need spacers? Or like how much wider are they than stock calipers?

[TedSanno]

Thank you for this info it will help with my time attack cb7 since it it is the same bolt spacing with the itr spindle. What is the recommended rotor diameter for this?. Is their a range that works.

[uwkcal]

Great video bro! Keep up the good diy vids

[Whitehatch_Checo]

Seems like the brake pads are larger then the rotor and stick off of it

[davidtcgroupr]

What about a 4 lug rotor? What sizes fit only 12.6”?

[Blackhemicameron]

Anyone know if these calipers bolt up to the 90'-93' Integra spindles?

[justintowers]

what is the spindle spacing on the ITR?

[nhantran]

Do you think shimming the caliper is a must? The stinger rotor, if I do my calculation right, should work without shimming.

[bonjouravecuns]

I don’t know if someone can confirm that my idea would work.

Can I use rsx base 32mm bearing and hub in a type-r (crv) knuckle. ?

Than I would only have to make a ring to make it hubcentric with the rotor. (64.1 to 68)

[nhantran]

any chance you can make a clearance profile off the brake with the anchoring point being the wheel hub?

[jamesnorth]

Where can I find these calipers? eBay hasn't shown me anything less than $1700 USD from spain

[sirdragos]

Hi! Does anyone know what's the width of the rotor?

[drjimjam]

Looks like the caliper is going to be on upside down? I believe the small piston is supposed to be at the oncoming rotor side with the brake bleed up.. This to prevent pad beveling as I recall.

[skotsephrenia]

Hello sir.. Kudos to you.. For this; I have a 1998 JDM itr 5x114 pcd with 36mm driveshaft.. Would this set up be suitable for my car without any further modifications? Thank you for help.. 👍