Huawei laptop not charging, type C charging port repair - a common fault on this model

preview_player
Показать описание
Рекомендации по теме
Комментарии
Автор

These are quite common for us as well, the EXACT same issue. I take the route of replacing the port completely and end up having to do trace repair. Looks like I was spending way too long doing that instead of just touching up those pins back to the board 😂😂 Live and learn! Thanks Sorin :)

JoeyDoesTech
Автор

Perfect soldering skills as always Sorin 👍👍

saltcityrepairs
Автор

So many electronics technician in YouTube and I assume you are the best for analysis in electronics & many.. many thanks for share knowledge 👍🏻🙏🏻♥️

opposites-
Автор

I always afraid of usb c type port
But u gave me a lesson to check first usb c port physically
Ty sorin sir ❤

aakashsinghrajpurohit
Автор

I don't see that lasting long with the centre plastic thing moving, ie, it needed to be glued down.

SidneyCritic
Автор

Good job, i think the port need more support because it is moving inside and that's what makes the pin broken.

humamalrawi
Автор

Sorin ... "The Professor of Tech"! Excellent work good sir, XLNT!

danytoob
Автор

You make everything look so easy. Thanks for sharing your knowledge. :)

nicnoc
Автор

Your vidéos are like a cinematic film, thanks sir

gymstrengthhakim
Автор

Amazing work Sorin, thank you for sharing ❤

MarlonITRepair
Автор

Great video ! - Could have done with soldering the sides of the socket for support?

whiteg
Автор

I sub you many years and just came to say you are great. Thanks for sharing your knoladge

someone
Автор

What connector is that before screen connector?

ZoClips
Автор

thank you so much sir i never stop learning

abcewq
Автор

thank you ... i remember have seen the same issue, pins brokens, with the same board .

Trustsimo
Автор

Perfect, I have the same problem.
I am going to try this fix.

ammaralhabib
Автор

Unable charger on 65w, but it able to charge on 25w phone charger (C-type)

chitithoti
Автор

just came here to see how to unplug the port, havent soldered sothing like this for years, but i will do it my self i enjoy complicated stuff :D

rytis-lvqx
Автор

I had the same problem with a Samsung phone. I checked on the components around the battery connection, then charging started. The battery was faulty, so I had a second try, charging started again. Third time I didn’t need the multimeter, charging started. I used a car charger to do this. Car drivers have additional benefits for devices if they use car charging, car charger fixes the memory effected battery even on Android 4.0, and 2.0. Car charger fixes the charging speed, so slow charging devices switch to faster charging without destroying the battery. One car charging is enough for a tab to have higher capacity and faster charging using its default 1A 5V AC charger. To do this, you don’t need to drain your car battery, just a few minutes charging is ok for the fix.

jozsiolah
Автор

I still think it is best if the charging port is separate from the motherboard.
You always has to plug and unplug the charger and even move the laptop around while the charger is connected.
To have the charging port soldered to the motherboard is not the best design.

Drottninggatan