Mercedes W211 E class | HID Bi-xenon projector replacement Retrofit tutorial (AFS headlight)

Mercedes W211 E class HID Bi-xenon projector replacement retrofit tutorial (AFS headlight)

0:11 Remove the clips, screw and rubber and heat the headlight
1:30 Pry the headlight open
2:00 Remove the reflective insert
2:15 Remove the Bi-xenon projector unit
2:35 Remove the projector from the holder, it's possible without removing the sensor. This will prevent problems with the alignment afterwards.
3:08 After the new projector is mounted, connect the ballasts to the bulb and mount the AFS projector unit again

Any questions? Contact us directly!

[phone]

Tolweg 2W
3851SK Ermelo
Netherlands

These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

#Mercedes #W211 #E-Class #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement

[keithspencersr.]

I was just so surprised no cleaning of the parts, i.e. Cover, housing were not cleaned while having this apart, great work, may do mine one day

[mrmuhtish]

Great video! Nice music as well. Wish there was more people like you that know what they are doing. :) I'm thinking about retrofitting my E55 W211 with some new projectors, as OEM have very poor output.

[haidziryusof]

Hi. It's an informative video and the only video that showing how to disassemble the head lamp. I might try to work on my head lamp but it looks quite difficult.

[sergeshkolniy]

very nice work, what kind projector was used ? will morimoto d2s 4.0 fit w211 ?

[nitileci]

Dacore merci
Mais esque comme dans la video nous avon besoin des cable 2ds ou lui dorigine fonction?

[vdgggame]

Hello for How long u baked the lights ?

[samaramin]

What is the correct position for the rotational sensor? I don't see a link for photos?

[mikekaly]

Hello, I see you have mentioned that these will fit e55 w211 headlights but will it fit my eagle eye w211 e350 headlights? And what kind of adapter should I buy ?

[raresvintea]

why do you use d2s adapters for the bulb? it's not the same socket on to the bulb?

[macmartinable]

hello, i have a mercedes ml 320 w164 is possible to make same work on my projector? where i can buy replacement parts?

[onurilgar]

Hi m8. Amazing work again. I wana ask a question to you. I installed a projector to my w203 2001 c200. It was halojen h7. I bought projectors from online. Before installiation i tested projectors they was working good. After installiation i released that the light is bending from sides and the cut side is blur.
Could this problem stem from the crystal headlight glass? My headlight glasses not clear nor transparent. They are old school iced glasses.

[justinm]

i did this to my rx8's headlight on the highbeams, but the positioning and angle of the light is not visible, night driving is hard seeing that the high beam projector doesn't focus on the road, is there any way to fix this?

[tunza]

hello I have c200 w204 2014 i want to fix projector can this be done ?

[joachimhanhart]

I've done this swap on a pre-facelift, D2S with AFS. The bracket that holds the lens needs cutting on two points to fit onto the black plastic carrier. On the same bracket the center hole, where the axel goes thru to the bearing needs to be enlarged. Good to have a rotary tool with cutting-disc handy, like the Dremel and some steel cutting skills.
Now i'm curious how the Evox-r 1.0 will improve the view at night..

[JESUS_IS_GOD]

What are the 2 silver modules on the bottom? One is a HID Ballast & the other??? My factory HID on my 2005 E55 AMG doesn't work. Igniter is good, bulb is good, so I'm thinking I need one of those two modules under the whole light @ 0:17

[saitsaatcigil]

I want to ask something, My friend. Something on my mind! In the headlights of the Mercedes W211, W220 they separated the low and high beam. But as such, when the low beam moves up, it has to move up along with the high beam. Otherwise the high beam will be below the low beam. Does this happen individually electronically? So, there is an engine in the high beam as well! Please can you answer? Thanks

[rjvidela]

Hello, fantastic work you do. Question; At what temperature and time do you leave the headlight in the "oven" ?, or are you simply checking when it releases ?, does the temperature affect the components of the headlight ?. Thanks and regards

[balroopsingh]

Did you had to bake the whole headlight to remove all the parts for retrofit?

I'm doing a retrofit on my 06 E350 from halogen to E55 bi-xenon projectors with Morimoto hid kit. I heard you have to remove all the possible parts from the headlight and bake it in the oven to loosen up the glue to remove the projectors? I don't see anything like that here.

Is there such an act or i can simply do the entire retrofit process without baking the thing? Baking the headlight just scares me a little...lol

[wacek]

how long and at what temperature did you set the heat gun? great video! 😀

[Dignitas]

I've got an W211 E-Class MY04 with D2S headlamps and adaptive headlights. Is there also a kit available for the adaptive xenon headlights?