Can You Flash Betaflight to a KISS FC? | FETTEC F7 & KISS V2

preview_player
Показать описание

Want to support me?
---------------------------------

Free Resources:
------------------------------------

Рекомендации по теме
Комментарии
Автор

To everyone who has tried this with the V2 and now can't re-flash back to kiss .... I had the issue where no matter what I tried, I couldn't get the kiss gui to re-flash back to kiss FW... I found if you open BF and load the kiss FW from local and let BF try and open the bootloader... Once it's informed you that it can't open the serial port go over to the kiss GUI leaving betaflight open and connect to what ever com port the V2 is on in the kiss GUI and there you go the GUI has found the V2 🙏😎👍 well this seemed to work for me.. Running windows 11 GUI's

Craig_Barker
Автор

I was low key freaking out with the 2mm driver near the board..😬😬😬😬

timothyphillips
Автор

You can also throw any kiss/fettec in the trash can after it erupts into a ball of fire

Aridrona
Автор

The real question is how to flash kiss to a betaflight fc 🤔

recursivefpv
Автор

To anyone that bricks their flight controller doing this to Unbrick plug into your pc with usb then click bootloader button after doing so the blue light should start to flicker fast once that happens open kiss gui and connect it will instantly take you to the fc flasher screen where you can reflags with kiss then back to betaflight or whatever you choose

terpsquirter
Автор

i've have the Kiss V2 and after flashing betaflight i couldn't get any signal from the RX. I used the UART 2 like you sad. Tried to swap TX and RX wires but nothing happen. Any suggestion?

babbuch
Автор

if you got problems to flash back to Kiss use Kiss Gui 2.0.29 should work. It worked for me to flash back. but on new gui 2.0.34 did not work. maybe that is your problem.

gameventures
Автор

Wouldn't this just make it a betaflight flight controller? What flight characteristic does it take?

kennykobi
Автор

After flashing to BF will Fetec FC still work with Fetec ESC or will we need to use BLHeli ESC?

TRexHeliPilot
Автор

I'm just trying to figure out why somebody would want to do this? I love betaflight 4.3, and I also have a couple fettec boards running kiss, so I'm not hating....just wondering if there is some kind of advantage to using kiss or fettec hardware with BF?🤔 Just for fun, or to try and convert some fan boi's? 😅
Thanks for everything, Mark! I've learned a ton from your content! 😎👊🏻

willpowerfpv
Автор

How would I go back to installing Kiss firmware? Thanks for sharing this

Dr.KaranSingh
Автор

can i flash the fettec firmware from a blank mcu? i do it on betaflight, on kiss impossible but on fettec i don't know

ChevChelios
Автор

Lol, bricked my kiss v2. Now when it's powered up it just goes into flashing blue light but bootloader not recognised.
Didn't like kiss anyway so meh.

baughaninastorm
Автор

nice way to turn a good FC into a piece of rubbish

westsidefly
Автор

Wtf u wanna do that. What a waste. Just go buy a beta fc

giorgio