How to set up the docking station for your Dyson V11™or V15™ cordless vacuum

How to set up the docking station for your Dyson V11™or V15™ cordless vacuum

The docking station allows you to conveniently store and recharge your machine between uses. It also provides storage for two tools.

Step 1. Drill two holes as per the recommended height in the instruction manual.
Step 2. Secure the backplate using the appropriate fixings.
Step 3. Position the jack plug on the front casing.
Step 4. Make sure the charging cable is secured neatly behind the front casing.
Step 5. Firmly push the jack cover down to secure the jack plug.
Step 6. Clip the front casing onto the backplate and push to firmly secure.

Our experts are on hand to help, so leave us a comment if you'd like some further advice.

#AskDyson #CordlessVacuum

Did this video solve your issue? Like if it did, or leave a comment. 👍

[christ]

For anybody wondering the instructions show a install height of 47 1/4" or 120cm which is measured from the floor to the bottom screw of the base station. This height does mean the dyson is not in contact with the floor while charging.

[johnvoss]

To drill a hole for the little "grey plastic things" (their words... not mine) use a 1/4 inch drill bit. This number converts to a 6.3 mm drill bit or in some countries it's an "E" size.

[yskim]

I hope Dyson to provide another video showing how to remove the front plate from the back plate. I see some explanation from Dyson's reply about the way of removal, but practically it's not easy. My feeling is that the designer didn't properly consider the situation that we move the position of docking station. I think It's almost designed for permanent installation.

[FrenchingAround]

I watch these for their asmr qualities

[alexnado]

It is a shame the leaflet instruction is nowhere on your website. I spend hours trying to find the recommended height.

[HyperionBadger]

"Our mission is simple. Solve the problems others ignore" -James Dyson

Well you ignored to make an instruction manual that makes sense or doesn't omit key items. And you ignored to build a website that provides information. Dyson comes in short for a $700 vacuum.

[ohharry]

Literally the most unhelpful video I’ve ever watched...

[pritamaries]

No sound but straight 2 D point. Perfect !!! Than Q

[duonghoangminh]

My best recommendation for dock: Use a marker to mark where to drill the holes.

[wingco]

Great about the height from the floor, thanks. By the way, thingies do not work too well on a plasterboard partition wall. Go and buy suitable hollow wall fittings.

[yanso]

I have pressed that cap on the front casing by accident before putting in the jack plug 0:37. Now the cap is locked and cannot be opened. How do I open that cap? It seems that it will break if I pry open it.

[RONALDB]

some advice: mount only on a stud, the vacuum and accessories need the added support!

[jamesmichael]

Is this the same as the v 12 slim detect origin? Thanks!

[jennarobinson]

How high did you instal the charging port from the ground? Is the Dyson hanging? Thanks!

[emilymanley]

thank you..these instructional videos are a good send..I hate the instructions..lol

[robertround]

If for any reason you need to say change the charger or location, how do you get the docking station off the wall? Or am I missing something.

[Vortexfilmclub]

why do they skip from measuring tape to screwing, what about the drilling?

[justincontreras]

For mounting Is the 47 1/4" an arbitrary number or is there a specific reason it says to mount it at that height?

[sebsgrrl]

So you give no instruction on how to open the little hatch that the cord jack fits Into. You just skip to her putting the cord into the base and snapping it closed.

[randomfrequency]

How do you open the cover for the jack plug though?