Watch how ultrasonic cleans spark plugs #shorts

I was Pushing gas pedal but no acceleration and the engine misfiring, and i didnt had a check engine light so i can read any code, and i found out there was Oil in spark plug hole due to cleaning oil from engine valve cover gasket
so i had to change it and clean clean spark plugs
so Watch how ultrasonic cleans spark plugs

[tymon]

Those look like NGK V-Power Cooper plugs. They’re about $1.50 a plug, you might have spent more on the cleaning solution.. And cleaning them doesn’t regrow the electrode…

[barrycolla]

When i was working as an aircraftmechanic, we used to sandblast them in a machine from champion sparkplugs...those were expensive plugs so we always cleaned them and tested them...worked fine

[jonmyers]

Lol, I just did that with a bunch of plugs I had laying in my toolbox. Just curious. I tested them in my lawnmower to see which ones were ok and then put them aside for spares. I wouldn't use them for tuning up my car, but they're good for having around to diagnose small engine issues. When you don't have a lot of money, every penny counts.

[johnnysolano]

You get out of here all this work for $5 plugs my guy

[muhammadafifazzindani]

Buy a new one you'll be fine, thank you

[Nick]

2 вопроса: зачем? Если свечи стоят не на много дороже комплекта фильтров
Второй: масляный фильтр чем стираешь?

[brake__cake]

Either the plugs are the problem, in which case they need to be replaced, or something else is fouling the plugs, in which case they'll clean themselves when you fix the problem.

Neither is solved with an ultrasonic bath.

[pfoxhound]

If the engine is fine - spark plugs are cleaned inside combustion chamber. 3$ regular spark plug? Is it worth it?

[Sh-shhc]

Берете Димексид кидаете в баночку разогреваете и остается просто протереть, а если пшикать очистителем корб. То он еще сдует со всех щелей +они высохнут за 1 минуту. На свечах не останется ни капли грязи, они будут как с магазина

[the_kombinator]

The brake cleaner near the end would have been step 1, then regapping the plugs step 2. Whatever the plugs took a bath in is completely unnecesary, a wire brush if anything at all.

[lone_wolfe]

can you ultraconic the spark itself or is it possible for blinker fluid to ultrasonic clean

[JohnDoe-efwo]

I just hit the electrode with a wire wheel, and good as new 100% of the time!

[jalimani-_-]

I want to ask please, what's the name of water compressor you used at the end of the video to clean. Thanks

[clamax]

Buen procedimiento, pero no era mejor reemplazarlas? Aparte de toda la suciedad hay un desgaste.

[rytin]

The problem is tip-in. Your throttle plate needs to be cleaned and you won't have the hesitation to tip-in with the pedal.

[ahmedmourad]

Buying new ones sometimes costs less than the electricity u spent and the liquid price and specially the time …

[nunyabusiness]

The primary reason to change plugs nowadays is erosion of the electrode, not simply being dirty. A set of 4 good plugs is like $40, you’d have to buy an ultrasonic cleaner and have a very low paid tech baby sit them to just barely come out ahead. Not worth it at all, just replace.

[paulwolf]

A propane torch does much better. Just heat until glowing.

[tinkerbell]

🤩WOW!! I KNEW THAT THAT THIS WAS POSSIBLE.JUST DIDNT KNOW HOW TO GO ABOUT IT. YOU ARE A GENIUS❤️💋 EXCELLENT JOB!

[ojobreaker]

I mean yeah if you are already cleaning another part and have the setup and gasoline still in the ultrasonic cleaner then this would be fine but to set it up all for a set of plugs they would need to be some high end plugs to be worth the hassle.
Or i guess if you have multiple sets that needs cleaning lying around