GPZ-7000 up against a modded GPX-4500

Matt found this target 4 hours before this video, he was waiting for Gino to meet him and test the target using Gino's GPZ-7000 Matt was testing the latest detectormods GPX upgrades.

[glendibben]

Doesn't the Fellow with the White shirt " Realize" that you can't get your Detector or metal objects within 10 feet of the other mam's Detectors etc

[neilwaugh]

I thoroughly enjoyed this video, two blokes living the dream, good onya :)

[darrenknight]

Fantastic guys ! good times. Good partnership, cheers

[ianmoone]

Based on the video the gpx4500 boosted appeared to discriminate its signal at the initial depth a lot better than the Z7000 but as others have said, the operator just thought the sound was ground noise, whereas the 4500 operator recognised the noise variation a bit better.
Is that due to machine setup or operator familiarity with their machine?
I’m not experienced enough to know!
I’m tossing up between the GPX 5000 or the GPZ 7000 & because I’d like to drag coil behind a quad bike on a sled, and you can’t yet buy larger sled coils for the GPZ7000 I’m leaning towards the GPX5000 at the moment.

[ronsta]

Lol Very funny... Famous ethnic Aussie digger sayings "are you patient enough? Well we are, so bugger you! Just wait", "Oh! Its gotta be out by now", "Stop a laughing its not funny, todays a Saturday, anything else there?", Have a nice night! Go to buggery.", " Well theres a blimey deep hole there so...its a very very deep and ah we certainly had a fun digging you didnt touch the pick. Hahahaaha

[peterwoodland]

If you wanted a large coil for the 7000 you can make one and take the ic chip on a genuine coil and permanently solder it to the connector pins inside the detector, then resolder the connector.

[triplebacon]

If you read the comments you'll find
Jean AArouet
is fairly messed up!! Enjoy yourselves lads (MATT, GINO) and please don't take ''pillocks'' seriously ;-) keep on keeping on!! nice find too!

[alanhughes]

i run the old gpx made in australia i tested it against the gpz 7000 on the maryborough test site i hit every target in enhance 12 and 9 the 7000 just barely made the targets i run 14 inch elite coil. not modded if it was modded it surly would get a little better signal response.these new type coils are bringing home the bacon.

[charlesmartella]

So what's best ? The 4500 or the 7000 ?

[david-dzsh]

my GPZ 7000 just came in mail. So happy

[carolmatthews]

Those diggers with long handles 50 dollars at Sapphire

[russellk.bonney]

Guy with orange harness needs to learn how to GB off the target.lol. Good hunting.

[brianwbrian]

you should get a bobcat and take some ground off the surface till you start getting targets again they're there they are just deeper.

[darrenknight]

the weight of the seven caused poor crossover response on the nugget.

[DetectorMods]

The reason I use a modded GPX and not the GPZ..

[oceanblue]

Sorry but the guy using the 7000 doesnt have it set up correctly. Either that or he hasnt ground balanced correctly.

[dasboot]

Two old farts and two pick shovels, if I were there with you guys. We would be three old farts and three pick shovels. I happen to have the GPZ 7000 but I am unsure if I should get the 19 coil for it. I heard that it really doesn't help that much, so I am watching more videos on it before I make the commitment to buy it.

[MannyScoot]

It's a cool video indeed .... Ha You guys are funny The Odd Couple

[BillyBob-tthy]

There are rules your coil causes interference along with your digger, I’m gone.

[stephensmith]

I watch these vids and no weigh in ???? whats the point