How to lay rigid vinyl planks? | Floorify Planks & Tiles

Installing a Floorify rigid vinyl floor is easy. Still, there are a number of steps that should be carried out in the right order.

Floorify planks are installed floating using a tongue and groove system. This helps to speed up installation of your Floorify tile floor. You can find more information in the installation instructions.

Floorify Planks & Tiles must be installed as a floating floor system: the floor panels must be able to expand and shrink freely at any time in response to changes in temperature. You may never glue, nail or attach the floor panels to the subfloor, to walls or to any other part of the room. You install the Floorify Planks & Tiles glueless: the floor panels are equipped with a click system so that you can click them together easily

5 mm expansion joint around all walls, pipes and objects in rooms up to a maximum of 20 x 20 m or 400m². Additional expansion joints must be provided in larger
rooms.

Installation of the first two rows. We pay a lot of attention to the installation of the first rows because it is extremely important that they are perfectly aligned. Start with the first (complete) floor panel in the upper left corner of your room.

Then take an incomplete floor panel (minimum 1/3 and maximum 2/3 of a panel) as first panel for the second row. Hold the panel at an angle of ± 30 degrees with the tongue in the groove of the first panel of the first row and then lower it. The panels will click automatically into each other.
Take a third floor panel of your choice. Place the panel at an angle of ± 30 degrees on the short side with the tongue in the groove of the other panel on the second row and then lower it.

MORE INFO?