Calibrate Channel Endpoints (SUPER SIMPLE!)

Calibrating channel endpoints in an easy, step-by-step approach using both Betaflight and OpenTX! Here's how to calibrate your receiver channels endpoints with your RadioMaster TX16S (or any transmitter running OpenTX firmware). Make these channel endpoint adjustments for each of your FPV drones and avoid uncommanded movements with your quad.

📚CHAPTERS
📑00:00 Intro
📑01:39 Calibrating Transmitter Gimbals
📑01:59 Center Transmitter Trims
📑03:06 Calibrating Channel Center Values
📑06:11 Calibrating Channel Endpoints (Minimums)
📑08:44 Calibrating Channel Endpoints (Maximums)
📑11:22 Using Channel Extended limits
📑12:31 Using RC Deadband & Yaw Deadband
_________________________________________________________________________

RESOURCES & LINKS MENTIONED IN THIS VIDEO:

⭐TMac FPV Website (FREE Resources & other GREAT STUFF!)⭐

_______
PRODUCT LINKS
This description contains affiliate links which allow you to conveniently find and purchase the items mentioned in this video at no additional cost to you. When you use them to make ANY purchase (not just the linked product) it enables TMac FPV to earn small fees which help support your TMac FPV channel. They are here for your convenience, there is no additional cost to you for using them, and you are not obligated to use them at all. As an Amazon Associate I earn from qualifying purchases. Thanks for your support!

_______
TMAC FPV PLAYLISTS

"OpenTX"

_______

SAY HI & SUPPORT FUTURE FPV FUN!

#endpoints, #radioamstertx16s, #tmacfpv, #betaflight, #opentx

[MichaelRogersJesusrules]

Hi Tmac i have been going insane for weeks!!! CLI wouldn't work to set throttle to 1000 everything else worked fine I used extended limit's it goes to 150, now i cant get throttle to 2000 even at max .I am a newbie, this drone was going to fly with or without a controller hehe. finally i must have typed in the correct words in YouTube or online, cant remember but i finally found you with everything i needed, Verry informative i thank you for taking time to help people lie me that dont seem to read manual's (i usually do but just cant find it in my mess) God bless and thank you for stopping me from going insane i hope i can arm it now and not smash it into a wall or myself lol. took me long enough to get the drone to stay connected to the controller long story that one (no one buy a tiny bee made by bee rotor emu and beta flight do not let it connect as its to old). i hope they dont expire me to soon hehe. i will be watching as many o your videos as possible (subbed as well0 much love from sth aussie outback. ox

[mattdrat]

Thanks! I spent a whole afternoon trying to figure out the extended limits function and you had the answer! Why oh why did they do that??? Just let us set the limits where we want to! Thanks again!

[rawfpv]

Awesome vid TMac ... hope to see u at 2021 IO Muncie this year

[nvembrace]

TMac I would have went crazy if you didn't show that extended limit option. Thanks a whole lot, all the way through everything. Your the man TMac 😎

[Musiquence]

very good video, thanks. I'm sure this is something many people aren't aware of. I wasn't :)

[Poyser]

I had an issue where in the receiver tab on the drone display it was yawing slowly on its own, even after doing multiple calibrations, this fixed it

[shouglifefpv]

Great information and awesome presentation Tmac! Get those endpoints dialed in for maximum performance and control

[kaptkrunchfpv]

Is there a benefit to doing the adjustments via the TX or does setting the ranges in BF accomplish the same thing?

[ho-fpv]

Great stuff I need to do mines because I see that they are not at 1000 or 2000 and when I did try on my own It did not change. Tonight when I get home ill try again oh I see I have to go to extended great im writing at the same time im watching the video and I think u solve my problem Thank u Tmac.

[marckart]

I just purchased a tx16s. Bog standard, brand new. I bound it to my quadcopter but my range in betaflight receiver is 1184 to 1850 on all channels. rxrange in cli doesn't modify anything. All my channels in the model setting are set to 100. My midpoint in the receiver tab is dead on 1500. Really struggling with this. I can't go past 100 in the output menu.

[jerryzito]

Thanks for the great video. I was hoping this method would help me. After arming, I raise my throttle stick to full, and the motors are at full. But when I lower my throttle stick, the motors remain at full power, and my throttle stick no longer effects the motors.

[pharaosa]

New to FPV and stumped:/ I was able to set my ppm centers, but when I go to adjust the min and max numbers, nothing happens? Any help is greatly appreciated.

[neomayad]

At 100 my range on all my throws is 1159 to 1840. I put it to the max at -150 and +150 and still only reaching 1074 and 1925 as my range. not enough for the quad to arm. When I click channel monitor on my tx its showing a range of 988 to 2012. Any suggestions on how i can fix this?

[samavella]

As always, great video TMac. I’ve been meaning to adjust mine and your video just motivated me to do so (most likely tomorrow though 👊😎👊

[PatrickGuerrisi]

I dont have a problem with the centre values I have a problem with my end points. I can get the min values to be 1000, but I cant get the max values to get to 2000 because its already maxed out at 100 on my outputs page on my TBS tango 2 pro radio. Any suggestions? Edit I was watching till 11 mins and you explained it. thanks so much man !

[reindalehill]

Does this same principle apply to Arduplane?

[visualdosage]

Hi i just got this radio, and when callibrating and sliding the right slider all the way to the top on screen i only see it going a bit above half of the center, the left slider reaches the top. Do u know a fix and if its software or hardware? When sliding it smoothly goes from the bottom till lets say 54% without a dead zone so i think its a bug or setting, anyone got a clue?

[Bill-NM]

Great video. My question is, why doesn't radio calibration take care of that?

[reginaldmcnab]

Does it have to be bataflight can’t it be done from the RadioMaster tx16s directly?

[SILVIOFRANCO]

How to have custom sound s on the radiomaster tx16s?