Computer Booting Process

[muthukumarc]

Windows booting procedure
Every day we are using an operating system and most specifically a Windows operating system but most of us are not aware of the process
or procedures involved in the starting of Windows. Here we are going to learn the step by step processes involved in the booting procedure
of a Windows operating system.
What is booting?
Before checking the booting procedures we should know the meaning of booting. Booting is just the process of starting or resetting the
computer. There are two types of booting: cold booting and warm booting. Cold booting is the booting process happening when we first turn
on computer and warm booting is the processes happening when we reset the computer. During the booting process the computer loads the
operating system to its memory and prepares it for use.
Booting procedure of Windows operating system
Functions of BIOS
The first process starting when you turn on your computer is BIOS i.e, Basic Input Output System. BIOS has two functions, to conduct
POST and read MBR.
a) POST - POST stands for Power On Self Test. POST checks all the hardware devices connected to a computer like RAM, hard disk etc
and make sure that the system can run smoothly with those hardware devices. If the POST is a failure the system halts with a beep sound.
b) Now BIOS checks the boot priority. We can set the boot priority as CD drive, hard disk or floppy drive.
c) MBR - The next duty of BIOS is to read the MBR. MBR stands for Master Boot Record and its the first sector on a hard disk. MBR
contains the partition table and boot loader.
Functions of Boot loader
Now BIOS has passed the control to boot loader and boot loader is a small program which loads kernel to computers memory. Actually
there are two stages of boot loaders, stage 1 boot loader and stage 2 boot loader. MBR contains the stage 1 boot loader and stage 1 boot
loader is a link to the stage 2 boot loader. The stage 2 boot loader resides in the boot partition and it loads the kernel to memory.
Boot file:
There are three boot files in a Windows operating system and they are NTLDR, NTDETECT.COM and Boot.ini. The boot files are found in
the active partition of hard disk and its normally C drive in a Windows machine.
NTLDR - NTLDR stands for NT Loader and its the second stage bootloader. The path of NTLDR is C:\Windows\i386\NTLDR.
Boot.ini - Boot.ini contains the configuration files of NTLDR. When the operating system is loaded we cannot pass any arguments to
kernal, so those arguments are passed through boot.ini. You can edit boot.ini by opening through notepad. The path of Boot.ini is
C:\boot.ini.
NTDETECT.COM - This file detect hardware's and passes information to NTLDR. Using the collected information the NTLDR creates a
hardware key and this key is used to detect hardware's. A new hardware key is generated after each reboot of the operating system and that's
why system asks to reboot after installation of a new hardware. The hardware keys created by NTLDR can be found in Windows registry at
HKEY_LOCAL_MACHINE -> HARDWARES.
Kernel and its functions
After executing the functions of boot files the control is passed to Kernel. ntoskrnal.exe is the kernel file in a Windows machine and its path
is C:\Windows\system 32\ntoskrnal.exe. Kernel acts as a layer between software and hardware. The library file hal.dll
(C;\Windows\system32\hal.dll) helps Kernel to interact with hardware's. HAL stands for Hardware Abstraction Layer and this hal.dll file is
machine specific. Now the drivers for hardware's are loaded from the file and the Kernel is loaded to
primary memory.
Services and log in procedure
When kernel is loaded in the primary memory services for each process is started and the registry entry for those services can be found at
HKEY_LOCAL_MACHINE - System - Current control set - Services. Winlogon.exe is the last
service started during this process. Winlogon.exe starts the log in procedures of windows machine. It first calls the library file msgina.dll
MSGINA stands for Microsoft Graphics Identification and Authentication and it provides the log in
window. Now msginal.dll passes the control to LSA (Local Security Authority), it verifies the username and password from the SAM file.
SAM (Security Accounts Manager) contains the information about all users created in a Windows operating system.
Now the booting procedure is over and we have reached the desktop of Windows operating system.

[sayemansari]

Where is the MBR??
What about the POST?
Wasnt there the use of BIOS?
Please make videos when you have the correct knowledge.. Don't spoil the students, and confuse them..

[ihsanbajwa]

To load an operating system....called boot it correct

[winhtut]

you miss many sir but you are good cause you give me important point of relation between hardward, os nad ram. thank a lot

[mr.]

Is it possible to boot computer without operating system?

[MridulSachan]

are bhaiya power on k baad BIOS ka role kaha gaya?

[indrajitdutta]

U need to learn first don't make this kind of just gave 10% is POST, BIOS, MBR, BOOT LOADER??
I'm requesting u plzzz don't make like

[pravakarpatel]

This is the example why india is bad in education because teacher themselves are not clear on the contents but have enough confident to make video likes this and destroy student carrier.. !! 95% of colleges and institution patterns are below the engineering level..this is the reason after completion engineering student suffer for job!😢

[rameshtripathy]

Sir no hate but your explanation wasn't clear please try to improve it

[sanjeevvlogs]

O bhai kaya para raha hai...tujey khud booting process ni pata

[muthukumarc]

Worst explanation of boot sequence, there is no post mbr shadowing boot loading files and how its working... Please remove the video...