Bafang 750 watt night ride.

preview_player
Показать описание
Mountain bike CUBE AIM EX, with BAFANG BBS02 750 watts, on night ride.
Рекомендации по теме
Комментарии
Автор

I put the same motor the 750w on my Trek and my brother wanted the same setup and now i have two Treks with the Bafang750... Im loving it... 🚲🚲

martintammo
Автор

1:51 you see your ghost bike from the previous lap 😂 looks like a slow lap this one 😂😂😂

SootyHunt
Автор

I wouldnt run my hardtail mountain bikes without front air forks and a suspension seat post. I have 2, bafang bbshd mountain bikes and a 750w mid srive i just bought. I never use gear sensors. Instead i change gears wben i stop pedaling then start pedaling and that gives a smooth change. Plus i found brake sensors very annoying. I use micro shift derailiers on all my bikes with a clutch an a ebike rated chain that everyone should be using on any ebikes. I also use sram level hydraulic disc brakes with ebike brake pads and ebike tyres from scwalbe which so far have done over 300kms and the tread lools like knew. And are an offroad tread. I would say i would not use an ebike without first installing an ebike rated chain and have a few spare quick links and fit ebike rated disc brake pads. I road one bike with standard pads and came down a 10% gradient amd by the time i hit the bottom, the brakes were almost non existant and were almost on fire on the rear. Good brakes are needed due to the extra weight and speed. Most brake companies like shimano and tektro all make ebike brake pads as well as sram. And one other thing worth noting is that using a programming cable can introduce a 30H code. I have also just had a eggrider i was programming on my phone make the motor it was attached to go into a 30h state. Apparently baffang are making motors so they cant be programmed using the aftermarket cable. As for the eggrider causing the 30h state, it is apparently lnown but i am het to tackle it. Im not very pleased as the motor controller it did it to o just sent away to be reflashed. My advice is to stear clear of programming cables and see if your supplier can program your motpr for you.

w.w
Автор

Πολύ ωραία βίντεο το χαιρόμαστε με εσένα .Μήπως ξέρεις πως επιλέγεις κωδικό πεταλιερας π.χ 44τ κ.λ.π αν θέλω να παραγγείλω κάτι τέτοιο.

azikoshome
Автор

Bottom bracket size in this Cubes is 73mm. Did you have to put some spacers or washers to properly install this Bafang motor? Is chainring with offset to correct chain alignment?

rgaik
Автор

Tie bicykle už majú toľko káblov ako staré počítače 😂😂😂

annastefanikova
Автор

HELLO I ALSO WANT TO KNOW HOW YOU PUT THE SPEEDOMETER IN THE VIDEO WHAT DID YOU USE, WHAT PROGRAM DID YOU USE PLEASE TELL ME TOO THANK YOU VERY MUCH

aaleex
Автор

Loved this video. I actually own a cube aim and i really want to get a 750 watt bafang for myself. I was just wondering what the top speed of your one is and if you have a link to where you bought it from

PAS
Автор

Very informative video. Is the seat a must have?

waynemcsweeney
Автор

What happens to the front gears and also what’s the top speed

yousuf
Автор

Μπορείς να μου πεις τι σου στοίχισε στη η μετατροπή;

After_GF
Автор

I got the same on a Trek 4500 26" hardtail with a weak 48v-10ah battery stock bafang 44t chainring. What cog brand ? I replaced the oem 11-34 to an cheap 11-44. The torque is so much i can hear clunking noise when shifting worried it will break. Top speed is aprox 30 mph!

HB-yqgy
Автор

You need to re-evaluate your definition of fun, I'd call that commuting

droneracer