Arduino Uno setup in Windows PC for A5 device bypass

Arduino installation,Setup and checkm8-a5 flashing in WINDOWS PC

Download file :

**** Instruction/Command

STEP 1
1. CYGWIN installation
in package installation sellect :
1. Git package
2. OpenSSH

STEP 2
Arduino installation and Setup using CYGWIN TERMINAL

1. install Arduino software
2. after install open Arduino Software
3. in Arduino Tools menu go to Manage libraries and install USBHost
4. Open Cygwin terminal
5. cd path/to/Arduino/libraries ( c/Users/user/Documents/Arduino/libraries )
7. cd USB_Host_Shield_2.0
8. git checkout cd87628af4a693eeafe1bf04486cf86ba01d29b8

STEP 3
Loading checkm8-A5 to Arduino board

1. connect Arduino board to PC
2. in Arduino Menu Tools sellect Arduino uno port and in Board sellect Arduino uno
5. After Done uploading Disconnect Arduino board from PC

STEP 4
Flashing checkm8 A5 from Arduino to A5 deivice

1. put A5 Device in DFU mode and connect to arduino usb Host shiled
2. connect arduino board to PC
3. count 20sec.
4. disconnect device from Arduino usb and disconnect Arduino board from PC

DONE! Arduino Flashing

Next is OPEN SLIVER in MAC OS and do Bypassing icloud

** sa susunod n pag bypass hinde kailangan gawin ang step1 to step3 umpisa n agad sa step4, kpag nag error sa load RAMDISK sa SLIVER gawin ulit ang step 3 to step 4

** Hinde pa supported sa windows ang LOAD RAMDISK kya need prin ng MAC OS pra mabypass ang A5 deivce

DONE THANK YOU!

[danisaputra]

problem
Sketch uses 7892 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 807 bytes (39%) of dynamic memory, leaving 1241 bytes for local variables. Maximum is 2048 bytes.

[bernardenriquez]

Bypass done ung Ipad ko kabayan slamat sa tutorial mo😃

[johnanthonydelacruz]

thank you so much it works on my ipad mini

[luxielivi]

Sketch uses 7892 bytes (24%) of program storage space. Maximum is 32256 bytes.
Global variables use 807 bytes (39%) of dynamic memory, leaving 1241 bytes for local variables. Maximum is 2048 bytes.
and then error problem uploading to board

[fathertheatheis]

My problem is that after entering the pwned DFU mode, windows 10 doesn't recognize the iPad in DFU mode, but it's recognized while in normal DFU mode; the whole process goes smoothly while loading the file to the Arduino board and after entering the iDevice into pwned DFU (Led blinking flashes 3 times and gets steady after a few seconds). As I said is just that windows recognize the iDevice (iPad 3) driver as a defective USB driver, I'm going to try to load the file to Arduino via Hackintosh to see if the code sent to the board is not corrupted, (what I truly doubt) 'cause in that case, it wouldn't get uploaded into the board, I'm right?

[RickTV]

No success sakin boss . Dapat ba orig lightning cable gamitin ?

[hebronelumagui]

Lodi ask ko lang, pwd ba makuha ung mac os tapos install sa PC, bale dalawang operating system

[silverionogasjr]

Hi, Sir do you think i can do the same with iphone 6 with activation lock. Thank you in advance

[pierpa_pierpaolo]

I started the code compilation but it gives me error: "constants.h: No such file or directory". How do I proceed?

[kennethcoronial]

sir update baka may software na pang windows wala kasi ako mac os huhu
btw po working na ang ardiuno ko po thanks sir

[rexelensmartirez]

error sa akin pagdating ko sa STEP 2 no.6...git not found command...any idea? thanks

[techgiant]

Not used:

exit status 1

'class USB' has no member named 'ctrlReq_SETUP'; did you mean 'ctrlReq'?



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
ung lumabas pag upload ko ung sa arduino
ano po kaya ito

[mamamoblue]

lods super thank you sa tut mo.. god bless

[fennydarmawati]

excuse me boss, I want to ask, I want to bypass my ipad mini 1 using Arduino Uno, at the step when I uploaded the synakuk checkm8 was successful, after that I unplug the Arduino from the laptop, after I unplug it I put my ipad into dfu mode, and I left it I continue to input the laptop into the host shield port on Arduino, after that I plug Arduino into my Mac ... but there is no LED light blinking or turning on ... what's the cause?

[damienlamy]

this is my problem git: is not a git command. See 'git --help'. its not patching

[techrodtv]

Sir ask q lng kung nid p gumamit ng net s mac pag ggmitin un sliver

[coachsotonil]

napalinaw ng tutorial mo lods, , godbless you lods..thank you.

[gracedy]

Pwedi ba sya sa ipod touch 5th Gen Boss sa 2024?

[naovero]

hello, where can i buy the usb host ? i have only the arduino

[haikuvlog]

Boss bat kaya saken success nman ung pwnd sa ardiuno kaso after bypass hndi na detect