Few people know about 1mm tubes welding Mig #sorts

[davidroman]

He didn't even use the movements he showed us and wtf is this a firework launcher

[FaridSaberiyekta-xc]

I hope you do not call yourself a professional because no welder welds with such a long wire sticking out of nozzle!

[Yorgh_Drakeblood]

I appreciate that you didn’t use those unnecessary movements demonstrated at the beginning. That’s a proper weld. But you could definitely tighten up that stickout ❤

[DreamFactories]

Wire speed way too high buddy try 300 IPS next time, you’ll get much less spatter.

[Николай-взз]

Настрой подачу и сделай вылет проволоки поменьше

[VypaGaming]

I thought he would've cut that damn wire down!?

[nknn]

Showed how to cook with movement, boiled without

[dewayne]

It kills me how far you got your nozzle out ! I hope it’s just the camera

[nathanjohnson]

I thought he was going to use the cursive e method And then he just sends it straight Both ways will give you great result. The cursive method just looks Prettiest

[VypaGaming]

How do u even build up to an 8mm run that quick on 3.5m/m?

[Luke-hoxi]

everyone talking shit remember this. He could've spot welded that but he instead ran an actual bead across it. So props from me 👍

[tomaszkorbut]

I recommend to pull your weld on thin tubes. Then your weld wił be thinner

[kraftswithkerzor]

Only a little undercut, need a bit more wire speed

[shimarlie]

that aint no 1mm tube that's for sure

[putrasitompul]

That's you call thin? I'm working on 0, 8 mm thickness with MIG. That's should be call thin!

[Formal.demands]

Wat a machine. Look how thick it lays. I think we are seeing bs here

[Ashen_Raven]

Heres few things:
Its not 1mm
Youve got a crater at the end.
Overlapped the start too much.
Way too much spatter.
Visually it looks like 3mm or so tubes, which is childsplay to weld.

[ubernate]

The CTWD isn’t as bad as people are crying about, but pretty much all the penetration is going to the vertical tube. Not a great weld but I’ve seen much much worse. 4/10
-Actual Welder

[ПавелЕгоров-гй]

Либо вы в самом начале пути по сварочному делу, либо вам пора заканчивать

[Marketingdosnegócios]

Quero ver soldar filetado na 3F na ascendente