Complete LILYGO TTGO LORA32 915Mhz ESP32 Setup and Range Test

Complete LILYGO TTGO LORA32 915Mhz ESP32 Setup and Range Test.
I have a few of these LILYGO TTGO LORA32 915Mhz ESP32 boards and it's time to fire them up and see what they can do. See how to prepare the Arduino IDE. Load the sketches onto the boards and test them in the field. Can I go a half of a mile on the ground?
GPS, LoRa, Radio and Telemetry Playlist
2Pcs LILYGO TTGO LORA32 915Mhz ESP32 LoRa OLED 0.96 Inch Blue Display bluetooth WIFI ESP-32 Development Board Module With Antenna
YogoGit / TTGO-LORA32-V1.0
sandeepmistry / arduino-LoRa
ThingPulse / esp8266-oled-ssd1306

[ShotokuTech]

GPS, LoRa, Radio and Telemetry Playlist

[dr.eng.danielamariei]

SUPER HELPFUL Tutorial.... Clear and concise.... Thank You!

[JudyFayLondon]

Thanks for sharing this very useful and informative video

[jamiegoegebeur]

I just ordered me some of these as well! Europe version tough gonna try putting them up high on building roof and see what that does to range

[gusmueller]

you should put one up on that mountain and see what the range is! that dry tucson air should conduct the signal like fibre optic cable!

[theUAPwhisperer]

Many thanks 🙏 I stumbled here via a Google image search 😅.. 😊 exactly what I was looking for

[ygrittesnow]

Questions. These are all battery operated with relatively low power consumption. What is the weight of these and could they possibly achieve a relatively high altitude with the use of a tethered large helium balloon? My understanding is these were originally created for paragliders to stay in contact once they hit the ground. The users on the ground would ping off users who were still in the air to communicate with others who were also on the ground to meet up.

[TamilLatest]

Question about the transmitter device - could there be multiple placed around the block, allowing the receiving device to listen to multiple transmitters? How does the receiving device know what to listen to?

[ClaudioBarca]

Thanks for this video. Can I connect this board with a GPRS module to send data via HTTP (es. Thingspeak) the LORA received data ? If yes what module can be use ?

[edwardfletcher]

If you change the Record frame rate on your phone to 60fps it might help see the OLED better.

[teknofatih]

Can we use for two way communacation. Get data end send data at the same device.

[ianboard]

When you did the range test, what spreading factor and bit rate did you use?

[qzorn]

hi, i just received the Lilygo esp32 can rs485 PBC, do you have a video on this PCB as a Modbus rtu rs485 master communicating to a slave-01 input registers 30001, 30002? thanks

[Francois_Dupont]

have you experimented with Meshtastic? i want to buy similar boards that DONT have a GPS on-board, and i am wondering if Meshtastic and everything will still work if i am using a cellphone connected wirelessly to the board. since there is a GPS on the cellphone.

[mustafanasralla]

I have experienced an issue with the OLED screen after uploading the Transmitter or the Receiver code to my Lora board. Upon plugging the board with a battery source, the OLED screen is not switched on, whereas there is a green light at the bottom of the board switched on.

I hope there is a solution to this issue.

[skylabby]

Can the firmware on these boards be upgraded to support meshtastic?

[richardroy]

When I compile it the compiler cannot find "images.h", does anybody know where that header file comes from?

[ammarazizulraheem]

I'm using a 915Mhz TTGO ESP32 Lora OLED 2.1. I tried connecting the board to my computer but it wont find the port. Anyone know how to fix this?

[mirzayudianto]

can it be used on the 920 MHz frequency?

[nankinmame_L_N]

I have problem that my laptop can't find port (windows 11), I try install CP210x USB to UART Bridge VCP Drivers for windows 11 but it doesn't work well. Anyone here has problem like this? Maybe I will install windows 10 if I can't solve this problem.