Web Firmware / Configuration Guide - LILYGO Meshtastic T-Beam V1.1 ESP32 Wireless Module

Welcome to our tutorial for the T-Beam V1.1 ESP32 LoRa 915 Mhz Wireless Module! In this tutorial video, we'll be walking you through the step-by-step process of updating the firmware and configuring the T-beam using Meshtastics Web-flasher and Web-Client. We'll cover everything from connecting to the module, updating the firmware, and configuring the device along with troubleshooting any issues you may encounter.

With the T-Beam V1.1 ESP32 LoRa 915 Mhz Wireless Module, you can easily create long-range wireless networks for a variety of applications, including Internet of Things (IoT) devices, sensor networks, and more.

Whether you're new to the T-Beam V1.1 ESP32 LoRa 915 Mhz Wireless Module or you're a seasoned pro, this tutorial is sure to help you get the most out of this powerful wireless device. So sit back, relax, and let's get started!

URLs:
Rokland-

Meshtastic Website-

Install ESP32 USB to Serial Drivers Help-

Meshtastic Web Flasher *Requires Chrome/Edge*-

Initial Config Web Client-

Initial Config Other-

Meshtastic Gihub-

Meshtastic Discord Server-

Meshtastic Forum-

Please subscribe to this channel and also our primary channel:

/ roklandwifi

About Us: We have manufactured and distributed WiFi antennas and other networking equipment since 2000, and have put our experience to work building you the best equipment for Helium mining. We are also an authorized RAK Wireless distributor and the largest authorized ALFA Network distributor and brand partner, and a leading retailer and developer of WiFi & 4G products based in Gainesville, Florida.

Have more questions? Let us help! We are open M-F 9-5 EST.

Phone: [phone]

Learn more and stay up to date at:

[nathanwhouston]

This is by far the best guide on the internet for this task!

Thank you for taking the time! (Subscribed)

[christhompson]

I've got a bunch of them from you and they work great! Thanks for sharing this!

[Francois_Dupont]

be sure to use a good USB cable that has the data line... that will save alot of trouble.
ask me how i know.

[rickinmi]

Excellent dissertation for initial installation and configuration! Were you to do a complete series, t wuld be well received 4 sure!

[jesusserrano]

Thank you very much for the information! Now, if I want to use it during my hikes in the páramos, and in addition to sending my coordinates via APRS, I want to use sensors to measure temperature, humidity, walking speed, and some other variables, or perhaps send an SMS with the coordinates at regular intervals using a GSM module, can I do the necessary programming to make it work? Since it is based on an ESP32, I think it could be done, but I'm not sure.

[Valium_x]

Good video, super clear instructions 💯🎉

[LoekBerkepies]

There are several versions of the board with different frequencies ( depending on the region of useable) is the frequency determined by the transmitting chip/ hardware or by the use of a different antenna?

[zarathean]

just bought a tbeam supreme from rokland quick service and delivery

[markplain]

Is it possible to change the screen and connect a larger display (like 7inch). Perhaps even have an extra power source to the bigger display.?

[justaregularguy]

So if I bought a tbeam v1.1 I could upgrade UT to 1.2 or no

[l.a.]

my computer doesn't have bluetooth... should I use serial? or switch to android ??

[вечная_мерзлота]

PLEASE make a video explaining all the settings in device configuration tabs.

[upnorthFPVandEUC]

Need help.. I have now bricked two of the lilygo t beam Lara 32 units trying to flash from 1.5 to latest version. Both have black screens now with blue light on and gps blinking red. What am I doing wrong?

[maelylopes]

I was doing this process, but the site is different, in the flasher part it appears just connecting, it does not start to install

[suomi]

what to do when my device has no screen?

[jaimz]

Man who makes threat is full of hot air. Its the quiet ones uou have to watch.