The QidiTech X-Plus-3 MAXIMIZES Value at ONLY $700

Learn more about QIDITECH with the following affiliate links:

The QidiTech X-Plus-3 is a remarkable 3D printer that redefines affordability and precision for engineers and enthusiasts alike.
Priced under $700, this feature-packed printer boasts speedy CoreXY kinematics and a heated printing chamber. It's powered by the
cutting-edge Klipper firmware, making it a versatile and reliable tool for all your engineering and creative projects.🔧✨

0:00 Introduction
0:32 QIDISlicer
1:22 Engineering Features
1:53 Klipper
2:33 Filament Holder
4:09 Printer Design
4:44 Print Results
7:08 Z-Offset Issue
7:54 More Print Results
9:15 Firmware Issue
9:59 Closing Thoughts

#3dprinter #3DPrinting #3dprint

🌐 Social Media Links:

💼 Consider purchasing with The Print House affiliate links (Help support the channel at no additional cost to you):

🛒 Merchandise Links:
👕 Official Merch: [Currently Seeking a Merchandise Manager]

💪 Incredible Sponsors of ThePrintHouse:

🔗 Other Common Bits:
🔔 Turn on Notifications
💬 Leave a Comment: Do you think the QidiTech X-Plus-3 is a good deal? Let us know in the comments below!!
👍 Like this Video!
📢 Share to all Friends!
🎥 Primary Equipment Used: [Who wants an equipment list?]

🙏 Thank you for watching! Don't forget to like, share, and subscribe for more ThePrintHouse content!

[CleetusVanDamme]

I have their X Max 3 and am loving it. For the dry box, I was able to purchase a Bowden tube and run it from the side to the back so I don't have to mount the spool of filament on the back anymore. This is super nice since the table I have it on is just big enough for this machine's monstrous frame.

[oleurgast]

Actually I have the X-Max 3 and the X-Smart 3. The board is based on the MKS Skipr. You can setup everything from scratch, there is even an actuall version of Armbian for the MKS Pi (which is integrated in the board). So you are not dependend on Qidi for any upgrades.

For me the most annoying part is Qidi using a thermocouple, not a thermistor on the hotend. I modified my hotend to use a Revo with High-flow nozzle, wich has about the same flow than the original hotend, but makes it much more easy to swap (without even recalibrating z-offset) to an ObXidian for abrasive filaments or to other nozzle diameters. However, due to no thermistor input on the printhead nor the main board, I added an old Creality board as 3th MCU just to get a thermistor input. Worked well on first try (and I am a beginner with Klipper).

[_B_K_]

A good video, but please stop yelling... makes it look like a lot of those immature hype videos -- could be just me, but... it matters to me, so I figured I'd give you that feedback.

[MakerBees]

Awesome video! Literally the first review of this brand that made me think it was worth a second thought. ❤

The narrative of your actual experience made it more interesting and genuine.

[adams]

I'm excited to get this! Just bought one for $580 on ebay killer deal

[gitss]

Nano Polymer Adhesive from Vision Miners. That lets me print for days without brims on ABS for most models, including a flexi dragon. Models that are ABS print friendly look really slick in ABS

[alx_]

Thanks for the great review. You mention that this is one of the best for engineering filaments ? Even better than the X1C next to it ?curious if Bambu is worth the extra $$$ if mostly printing ABS/ASA.

[psxtuneservice]

I had no problem with z filament sensor must be activated in the menu....i had no problems with the menu looking up. Hotend is connected strange to the motherboard not upgrade friendly

[hood]

@theprinthouse Which mid range (£800 avg), core xy, enclosed printer do u recommend?

[Victor-zesd]

How far away from Bambu is the print quality on the Qidi?

[quinndle]

I just got this printer and have yet to get a successful print. Im using their petg and default settings ao im wondering if im having the z offset problem. I cant even get a first layer to go down without messing up. How did you calibrate your z offset if not with their paper card? Thanks!

[MrDubb]

What kind of filament will I need with this printer to ensure my prints come out solid and sturdy? As in hard to break...

[MattBieniek]

When you say that you wouldn't recommend the X-Plus-3 for PLA, do you mean that it doesn't work well for PLA or that its overkill for primarily PLA usage?

[dPrintingMatt]

Have you seen their video about adding a camera to this model, and the other 3 series printers? I have the Max 3 and love it, but the filament runout sensor is not turned. on by default, you have to turn it on yourself.

[RL.]

It'll be very interesting to see if the upcoming Bambu X1E at 4x price that Qidi charges for these.

[paulguerrero]

Thumbs up cause your cat looks like mine....and I'll probably get this printer.😋

[dejedejsson]

The nozzle reaches 350c according to Qidi!

[Affordy]

Qidi 's camera is on pre sale... Now I'm waiting for z offset sensor..

[PasswordincorrectStudios]

Given the price on the website is $645 rn would u suggest this to a beginner printer for the price and the quality

[j.hunter]

I have owned the X-Plus 3 for over six months (having previously owned the original X-Plus for several years). IMO, the X-Plus was a MUCH BETTER printer. Yes, the X-Plus 3 is faster. BFD. Half the parts off the X-Plus 3 are pure garbage. I mean absolute fails from attempts at simple parts with Qidi Tech supplied PLA. I wish I had kept my older model (given away as a gift). The X-Plus 3 also suffers from firmware issues. All in all, this machine has been nothing but frustration for me. It is a beta product that should have never been released for sale.