9 Best Angle Grinder Hacks | Simple Ideas

Angle Grinder
Brand: Makita
Model: GA4033

Sand Belt (Circumference: 533mm, Width: 30mm)
Brand: Utoolmart

Bearing (Outer diameter: 35mm, Inner diameter: 10mm, Width: 11mm)
Brand: NTN
Model: 6300LLB

Speed Controller
Brand: サンウェイ
Model: SC-01

The belt of the belt sander remains in a position with a long circumference.
It is essential to securely attach the base plate to the grinder body. (I shaved off a small protrusion.)
For safety, the RPM has been reduced to about 5000 for the test run.

[YASUHIROTV]

Since grinders rotate at high speeds, if you're concerned about the safety aspects such as material scattering, consider using a variable speed grinder or a speed controller (10:32). Details of the tools used are listed in the description. Thank you for watching.

[wingnutbert]

As a metal worker and weldor, having made all my own fixtures, jig's and many tools my whole working life, this is a fantastic video with really well done ideas. I would suggest a variable speed grinder for anyone building these.
This old dog appreciates seeing these tricks.

[xyelwtx]

Серьёзно подошёл к процессу. Это уже и самоделкой трудно назвать, это скорее глубокая модернизация всем знакомого инструмента. Браво!

[truperda_staraja]

как приятно смотреть когда все материалы, станки, оборудование, фон, всё новое, красивое, чистое. Спасибо за идеи

[crossgrainwoodproductsltd]

I have long been an admirer of the Japanese culture and their craftsman, and you sir are a shining example of that craftmenship. Smart, simple jigs that others can reproduce. The ideas you come up with are brilliant! I am currently studying Japanese joinery and it is challenging but a lot of fun too. Thank you for your videos, they are inspiring.

[bruce-le-smith]

just the first 30 seconds are mind blowing, no goofing around, no crazy music, no filler lines, just straight to the great ideas! thank you. subscribed

[leeseoWestport]

I love it when the only non-hand tool you use is a drill press, and then you make your jigs so precisely.

[phamiliar]

Watching you makes me nostalgic. My grandfather was a garden tool fabricator in Vietnam before the fall of Saigon. And growing up when I would visit him in the summer in Calgary Canada I would see him modify so many things in my presses and molds for sausages and cakes and meat patties. Somehow watching you work brings back sweet memories of my maternal grandfather thank you so much for your work and sharing it with the rest of us Love and peace from New Jersey.

[pacman]

This makes it worth spending more money on a better performing tool, so many applications. Thank You.

[mountriscan]

-Craftsmanship all in one video.JAPAN 💯💪

[DeminPeter]

Исполнение и задумка на грани гениальности

[garoglen]

I got into woodturning several years ago and discovered I needed this and that and that making my own tools and jigs was as much fun as using them for the needed task .

[arthurmorgan]

It is so beautifully done, I would not even call it a hack.

[craigmurrayauthor]

please be so very careful adding anything to a grinder. A drill turns at about 600rpm, a lathe at about 1000rpm and a grinder at about 6000rpm. If something comes off it, it's gonna hurt

[Mr.ky]

I am a technology enthusiast. When I watched this video, I saw that you have skillful hands and extremely high creativity. Thank you.

[TheSchizoDuckie]

These should be the only allowed angle grinder hacks on youtube.

[dgdhusz]

Хороший инструмент в руках настоящего мастера звучит чарующей музыкой творения вещей! Детям такое надо показывать!

[sitiodaterrapreta]

O MELHOR vídeo de aproveitamento de uma esmeriladeira até agora já visto na web.

[_shlee_msk]

Если ты используешь болгарку как привод в каких-нить приспособах и узлах, то обязательно устанавливать ее искрой от себя! А если при этом ты собираешься работать и с деревом, то на часть корпуса с воздухозаборниками натягивать носок резинкой перед воздухозабором и с легким каркасиком, расправляющим носок, внутри. Потом сам посмотришь и офигеешь, сколько пыли на нем останется. Можно найти пластиковый флакон, диаметром больше болгарки на 1-2см и прорезать в дне отверстие по диаметру корпуса болгарки. Надевается на корпус сзади и протягивется вперед, закрывая воздухозаборники. Фильтр/носок натягивается уже на него.
А чтобы не поднимать облако пыли 15:14 лучше установить на выпускные окна охлаждения отклоняющие поток в сторону направляющие, которые можно или напечатать на принтере, или выклеить по матрице из эпоксидки. Можно даже из бумаги с клеем ПВА по технологии папье-маше и потом пропитать ПВА и снаружи. Получается прочный композит.
В вашем случае начать с того, что развернуть корпус редуктора на 90 гражусов для выброса воздуха в стороны, а не вверх-вниз.

[sebastianbrooks]

I thought this was going to be another video full of insanely dangerous hacks, but these are really interesting and inspiring (and not immediately deadly). I'll be watching for more videos like this!