filmov
tv
ANSYS FLUENT Training: Spray CFD Simulation Using Injection in DPM
Показать описание
The present problem simulates the process of water spray into a cubic space. The aim of the present study is to investigate the behavior of water flow during the spraying process from a very small circular section to the inner space of an area with a larger volume, which examines the behavior of water flow by tracing every particle. Therefore, to simulate this model, the Lagrangian perspective should be used, which is possible in the form of a Discrete Phase Model (DPM).
In fact, the difference between Lagrangian and Eulerian view is that fluid behavior in Lagrangian is examined in terms of particle tracing in fluid flow, while fluid behavior in Eulerian is based on the assumption of a finite volume element in the fluid flow path. In addition, the drawing space in the form of a cube in the present model is a general space, which the walls of the cube have the boundary condition of atmospheric pressure. The present simulation is unsteady and the time step size is 0.00000999.
In fact, the difference between Lagrangian and Eulerian view is that fluid behavior in Lagrangian is examined in terms of particle tracing in fluid flow, while fluid behavior in Eulerian is based on the assumption of a finite volume element in the fluid flow path. In addition, the drawing space in the form of a cube in the present model is a general space, which the walls of the cube have the boundary condition of atmospheric pressure. The present simulation is unsteady and the time step size is 0.00000999.
0:06:14
ANSYS FLUENT Training: Spray CFD Simulation Using Injection in DPM
0:00:18
Deodorant Spraying in the Restroom, CFD Simulation Ansys Fluent Training
0:13:52
ANSYS-Fluent Tutorial || Spray simulation by using DPM model
0:12:21
ANSYS-Fluent Tutorial || Spray simulation by using DPM model
0:00:35
Color Spraying With Wall Film, Simulation, Ansys Fluent Training
0:05:18
Spray Dryer CFD Simulation
0:00:21
Water spraying from the roof of the greenhouse, Ansys Fluent Simulation Training
0:03:41
Diesel Spray Ultra-High Injection, Paper Numerical Validation, ANSYS Fluent Training
0:06:28
ANSYS FLUENT Training : Diesel Spray Ultra-High Injection CFD Simulation (Validation)
0:00:05
Spray CFD Simulation Using Injection in DPM
0:00:27
DPM to VOF, Color Spray Gun CFD Simulation Tutorial
0:00:04
Spraying into the human lungs, Ansys Fluent Training
0:00:09
CFD - Simulation des sprays avec la formulation VOF to DPM dans ANSYS / Fluent
0:14:31
ANSYS FLUENT Training: Biomedical CFD Training Package
0:05:37
ANSYS Fluent: Efficient Modeling of Spray Breakup using VOF-to-DPM Transition
0:00:21
Human Cough Virus Particles in the Coffee Shop, CFD Simulation Ansys Fluent Training
0:00:11
Pollution Spread in the Stagnant River, Ansys Fluent Training
0:00:16
Flood over Bridge CFD simulation | ANSYS Fluent Tutorial
0:00:16
Rice Drying Device (Using Two-way DPM Model), CFD Simulation Ansys Fluent TrainingRice Drying
0:03:35
ANSYS FLUENT Training: CFD Training Course by ANSYS Fluent Software
0:05:20
ANSYS FLUENT Training : CFD Training Course by ANSYS Fluent Software
0:00:09
Microfluidic Droplet Generator ANSYS Fluent Tutorial
0:00:09
Side Entry Mixing Tank in Different RPM, CFD Simulation Ansys Fluent Training
0:00:11
ANSYS Fluent CFD Simulation: Contact Angle Effect on Friction in Hydrophobic Surfaces
Комментарии