Retrofit Auto Hold Audi A4 B9

Nu uitați să dați Subscribe dacă v-a plăcut videoul!
Mă puteți urmări pe:
==============================================================================
Please don't forget to Subscribe if you liked the video.
You can follow me on:

audi, audi a4, audi a4 b9, audi a4 retrofit, audi retrofit, auto hold, audi auto hold

[matteo_micarelli]

Auto Hold installed correctly!
I confirm that the active PIN "under key" is PIN 5.
Thanks a lot

[TheCarambaTB]

Thank you very much, just successfully installed and coded the button. Everything works great and no faults.

[alcalin]

Super! Ar fi misto de vazut si un retrofit la Ambient Lighting

[teddycristian]

wow nici nu ma gandeam ca e posibil sa ii faci retrofit, super

[TheMadger]

Thanks for the video. Will try to install it next month. I have bought a wire kit from Ali. So hopefully everything will go well.

[savouryfriend]

This is fantastic, will be doing this soon on mine. Thanks for the video!

[specterSAN]

Good work, te urmaresc cu placere cand vine vorba de audi stuff. keep going!

[stephansantens]

Thanks a lot for this perfect install video. Will be doing same thing soon.

[nardo]

Bună, v-ați gândit vreodată să înlocuiți un aparat de aer condiționat analog cu unul digital. Ar fi un videoclip foarte interesant.

[hamzachafable]

Very nice work
Is it the same procedure for Audi A3 8V?

[pavlezt]

Very good video, Thanks.
Question: how AutoHold now with start/stop - in my car engine is turned on after I release brake pedal, while Auto hold is switched on and car stays still.

Secondly, does your bulb in Parking Brake button works well? In my car this button works well, but there is no light for it.

[daveross]

fabulous
im about to do this on my s4.when i get harness from ali, which side is the bcm on right hand drive models?

[furkan]

Thanks for the video and instructions on your website. I have installed the autohold and code it. Is it correct that if you put in reverse that the autohold will be off?

[xBigozx]

great video and instructions - i cant get the button to work..it illuminates when i turn the lights on, but the hold function isnt working. and the red light doesnt illuminate on the button. i think i must have some wiring wrong.

[proluxify]

Salut. Faci cumva astfel de lucruri (contra cost, normal) pentru posesori de Audi din Galati ?

[paralelmind]

din punctul tau de vedere a meritat retrofitul?
eu nu am avut pana acuma masini cu autohold, nu am ajuns la punctul "o data ce l-ai avut, nu vrei sa nu-l mai ai"

[wojtekbmv]

Did you already verify the POSSITIVE pin? Shall it be on PIN4 or 5 on the parking break button?

[adrianb]

Multumim pt video - si eu vreau sa adaug optiune auto hold :)
Ai cumva ceva info sau vreun link cum pot face un retrofit de ADS ? Caut pe net si numai povesti ... Nu gasesc nimic concret....

[airforcebg]

There is no need to remove the OBD and other stuff from the panel. There is plenty of room. I've spliced the A32 near the plug as the kufatec manual says. It works good now.

[claudiualexandrutanasa]

Salut, felicitări pt video...chiar ai avut ceva de lucru!Te rog spune mi si mie ce vcds folosești pt masina...am si eu unul dar nu imi recunoaște masina(cred ca e prea vechi).Merci...si la cat mai multe video!