SSUPD Meshroom S V2 - 15L SFF Case With Infinite Possibilities

Who said a 15l PC Case couldn't fit an ATX motherboard? It wasn't SSUPD! The new Meshroom S V2 provides you with so many possibilities. From huge Graphics Cards to 280mm AIOs or even custom water loops! Let's have a closer look at this SFF case and see how much we can really do with it!

-- SSUPD Meshroom S V2 on Amazon (Affiliate)

-- SSUPD Meshroom S V2 Manufacturer

Check out our Written Guide:
- Soon

00:00 SSUPD Meshroom S V2 Intro
00:58 Colors & Options
02:40 Opening Case, Size & IO
04:40 mini-ITX Configuration
08:00 mini-ITX GPU Options & 4-Slot GPU Mode
11:15 Mini-ITX SFF GPU
11:55 ATX & MicroATX Configuration
15:50 Top SSDs & 15mm Fan
17:12 Even More Drive Spots
17:30 After-Build Thoughts
19:36 Issues: IO, Feet & HDMI
23:20 General Thoughts
24:48 Performance
25:53 Bye

#sff #pccase #pcbuild #minipc #pcgaming

[wkungYT]

Extension Bracket is the only thing missing from this exceptionally detailed review. Kudos👍

[bighairycomputers]

That GPU output cable routing make multi-monitor setups way more difficult. You'll have to buy new 90 degree cables, or get the feet, or 3D print feet.

[gemstone]

very cool case and really well done review

[cryonic.]

i set my rad fans to exhaust for these types of hot box itx builds, just need to plan extra room for fan grills. the only thing is that i have to turn the front of the case away from me because the amount of heat extraction out of the radiator can make it feel like a space heater. although that could come in handy for the winter

[Floorsz]

20:40 Bro, it shows the cable being installed above the support bar, not below it like your trying to do. Was there no room to do what the PDF shows?

[MrCyost]

If you have a 3d Printer there are ways to expand the front for sure and the side I believe..

[e]

It looks like there's enough space for a classic build without a riser, but unfortunately, it isn't supported. I also agree that with all the expensive extras, it feels like they're trying to squeeze as much as they can from the customer, to the point where it's uncomfortable.

[NeonKing]

The best way to use this case is get a itx boards with display port out over usb C so you only need bottom ports for hdmi

[rhiethreal]

Can this fit an ATX board with a full sized PSU and a 2 or 2.5 slot GPU? I would like to reduce my case size, but I don't want to have to repurchase my MOBO or PSU.

[ExplosiveTowel]

Hello my good sir may you review the new proart 360 aio cooler(it’s super new)

[felentus]

I do understand not including a 90° HDMI adapter. HDMI 2.1 signal integrity is already kinda hit or miss and including an adapter that reduces signal strength and quality even more is just asking for problems. Including a cable for normal length use is imo the best they could have done. Long HDMI cables are way to expensive to include "just in case" and an 90° adapter will just fill the web with complains of monitors / TVs not working correctly anymore.

[ericvalentine]

so use 7800x3d.... with a low pro air cooler?

[tinygriffy]

The price tag is kind of enthusiast level.. I'd rather go with a cardboard box then 😅
Thanks for the review though !

[lolcatmaroon]

This is a great honest review. But the lighting was terrible. Couldn't get the depth of some of the components and I'm on OLED!

[mindinversions]

Needs 360mm rad support. Sorry, my gpu has a 360 so the weight of the heat spreader didn’t fracture my housings foundation.