CJ Project Krimpstang: 1996 Mustang Coyote Engine Swap Overview

Bill & the crew here at CJ's are going to officially commence project Krimpstang! We're starting off by dropping this Ford Performance 435 Horsepower 5.0L 4V Coyote Mustang Crate Engine into our 1996 Mustang Cobra (The Krimpstang).

Purchase Product Here:

Ultimately, our goal is to turn The Krimpstang into an NMRA factory stock race car, now, we're one step closer to the goal!

Keep watching our channel and get ready for some great installation videos. Also, if you have any questions about our new project, don't hesitate to shout out to us, just post in the comments below!

Check out more 1994-2004 Mustang parts from CJ's here:

Check out more Ford Performance Parts from CJ's here:

Check this out for more info on a Foxbody Coyote swap:

Check this out for more info on an SN95 Coyote swap:

Subscribe to CJ Pony Parts on YouTube here:

[cycloneryder]

This is probably the sickest motor swaps in a Mustang there is

[garrittpwl]

Gathering parts to do this in my 96 248a GT. Hope to see the wiring video soon.

[TheXclock]

Can't wait to see this cobra running with its 5.0!

[waylinvanhalen]

BILL WILL YOU DO THIS TO MY STANG? lol got a white 96 gt thats still rockin - need to do this though

[stricklandsports]

Been researching swapping the 4.6 2v out of a 2010 Police Crown Vic for this motor. Not a lot out there. Other than it's full of pitfalls.

[GameOver]

Great work like always. Curious, why did you remove the 4.6? Something happen to it? If not wouldnt forced induction be a cheaper route? I'm a HUGE fan of the 96-98 cobras

[mollybags]

so it bolted right up to the stock k member? very nice !!

[hector]

I want a in detail wire harness install

[WestsideWoo]

Is the K-Member on the V6 and GT the same? Thanks in advance.

[alexjuarez]

The bolts for the motor mounts are M10x1.5 by what else 50mm 25mm?

[dannyrighi]

Question what kind of headers should I use for a 96 mustang gt swap

[Rehziicodm]

What transmission was used ? I want to put a t56 magnum in while I’m out it but don’t know everything I need to make it work in the sn95

[moyrod]

quick question how or what did you do to make your cluster to work with this swap, i would like to do the same but mine is a 2003 Mach 1 thank you

[alexjuarez]

If I have a 1994 mustang with a gen 2 motor can I use a 4.6 k memeber? Would it bolt right up to the 1994 since it’s for a 5.0 I’m guessing yes since the chassis are the same? Thank you

[fko]

I have a 95 how much different/ difficult is this swap with 95

[jeepfan]

Would you guys sell a tubular Kmember for a fox mustang for this exact swap

[JaVvii]

Will this work with the stock gauges once everything is connected?

[budsworld]

would it fit for 99-04 if I did the 5.0 swap...I really wanted supercharger with the coyote motor swap. ..I have an 04 saleen mustang

[hessxpress]

four smaller bolts on each motor mount were loose. replay the vid..lol

[chevy]

Do you have any newer updates on that car?