How to attach fastcoat to spray Gun? | Krakenbond

The fundamental goal of insulation is to prevent or at least slow down the transfer of the heat from the heated places to the unheated places at your home or from inside your house to outside. Insulation works in this way by reducing conduction, convection, and radiation.

FastCoat insulation spray foam solves technical problems economically and without any problems on surfaces that are sprayed as liquid and therefore can take their shape on the surface, with special details and unique forms.

With the use of a gun, the application is much faster and much more reliable.

✔First, shake the foam tube well.

✔Shake the foam tube for about 30 seconds and uncap the tube.

✔Attach the spray foam gun to the opened cover by turning it.

✔In order to prevent the foam from leaking and wasting, attach the appropriate apparatus to the application surface at the tip of the gun in such a way that there is no gap.

✔Hold the gun at an angle of 45 degrees to the surface during application.Then, press the trigger on the gun to ensure that the foam is sprayed onto the surfaces.

✔Use the Foam & Foam Gun Cleaner can by shaking it very well. Tightly attach the shaken can to the spray foam gun.

✔Press the trigger until the cleaner comes out of the gun.

Do not forget to use protective glasses and gloves while applying.

Visit our web store using the link in our profile.

Shop Now 👇

👇For detailed information visit;

☎️ Call us! [phone]