Vectric V10 Tutorials | 2D Toolpaths | Array Copy & Merging Toolpaths Guide

preview_player
Показать описание
***PLEASE NOTE: This Tutorial was created to demonstrate the features in V10 which is no longer the current software available, and is here for reference to customers using V10. Please refer to the latest software playlist for the current set of tutorials.***

This tutorial demonstrates how to use the Array Copy Toolpaths and Merged Toolpaths feature. The Array Copy Toolpaths feature will take a single set of toolpaths and copy then in an array. The Merge Toolpaths will take a set of toolpaths that use the same tool and allow you to merge them into a single toolpath giving you options to control on how they are cut.

Bookmarks:
~ Array Copy Toolpaths 00:37
~ Merge Toolpaths 09:44

#Vectric #CNCsoftware #CNCtutorial #VectricSoftware #CNCsoftwaretutorial #CNC #vcarve #toolpaths

  1. Vectric Ltd
  2. Vectric
  3. CNCsoftware
  4. CNCtutorial
  5. VectricSoftware
  6. CNCsoftwaretutorial
Рекомендации по теме
Vectric V10 Tutorials 0:13:27

Vectric V10 Tutorials | 2D Toolpaths | Toolpath Tiling

Vectric V10 Tutorials 0:20:07

Vectric V10 Tutorials | 2D Toolpaths | Auto Inlay Toolpath Guide

Vectric V10 Tutorials 0:41:17

Vectric V10 Tutorials | 2D Toolpaths | Pocket Toolpath Guide

Vectric V10 Tutorials 0:11:51

Vectric V10 Tutorials | 2D Toolpaths | Vectophone

Vectric V10 Tutorials 0:13:04

Vectric V10 Tutorials | 2D Toolpaths | Quick Engraving Toolpath Guide

Vectric V10 Tutorials 0:14:42

Vectric V10 Tutorials | 2D Toolpaths | Childs Name Plaque

Vectric V10 Tutorials 0:10:42

Vectric V10 Tutorials | 2D Toolpaths | Raised Panel Door

Vectric V10 Tutorials 0:07:24

Vectric V10 Tutorials | 2D Toolpaths | Vector Textures

Vectric V10 Tutorials 0:12:55

Vectric V10 Tutorials | 2D Toolpaths | 3 Legged Table

Vectric V10 Tutorials 0:18:23

Vectric V10 Tutorials | 2D Toolpaths | Array Copy & Merging Toolpaths Guide

Vectric V10.5 Tutorials 0:08:21

Vectric V10.5 Tutorials | Toolpath Saving Guide 2D Toolpaths

Vectric V10 Tutorials 1:02:55

Vectric V10 Tutorials | 2D Toolpaths | Profile Toolpath Guide

Vectric V10.5 Tutorials 0:51:33

Vectric V10.5 Tutorials | Thread Milling Toolpath Guide 2D Toolpaths

Vectric V10 Tutorials 0:25:08

Vectric V10 Tutorials | Getting Started | Bulls Head

The Most Complete 1:45:10

The Most Complete Vectric 101 Tutorial for Beginners (Vcarve, Aspire, Cut2D), CNC Router Project

Vectric V10 Tutorials 0:35:45

Vectric V10 Tutorials | Getting Started | Shell Sign

Vectric V10 Tutorials 0:23:14

Vectric V10 Tutorials | Getting Started | Open Sign

Vectric V10.5 Tutorials 0:47:41

Vectric V10.5 Tutorials | Pocket Toolpath Guide 2D Toolpaths

Vectric V10 Tutorials 0:50:19

Vectric V10 Tutorials | 2.5D Toolpaths | VCarve Toolpath Guide

Vectric V10 Tutorials 0:16:49

Vectric V10 Tutorials | 2.5D Toolpaths | Vector Textures

Vectric V10 Tutorials 0:11:00

Vectric V10 Tutorials | General Topics | Interface Guide

How To Carve 0:06:03

How To Carve Any Image On A CNC - Making The Vectric Toolpath Tutorial

Vectric V10 Tutorials 0:21:38

Vectric V10 Tutorials | Getting Started | Wing Rib

Vectric V10 Tutorials 0:20:26

Vectric V10 Tutorials | Getting Started | Importing 3D Toolpaths

Комментарии
Автор

Thanks. But what if a bit broke half way through all the cuts. Is there a way to restart only in the section where the bit broke? Or do you have to run the file from start to finish which you would be cutting air until you got to the area where the bit broke?

dalemathis