SUPER EASY Boat Wiring Electrical Diagrams, Fuse blocks, busbars, marine grade

** TBNation's SOCIAL MEDIA platforms**
_______________________________________________
**Instagram: Handles**
@tinyboatnation
@tbnation_fishin
_______________________________________________
**Find us on Facebook**
______________________________________________
Music:
From YouTube Free Creator Library.
or Art-List.
_____________________________________________
Recommended Channels:
TBNation Outdoors
Texas Tiny Boat Nation
Fireant Fishing
JDS Outdoors
Decked Out Jon Boats
Jar-Mouth ADDicT
________________________________________________

Disclaimer: I am not a professional fabricator or builder.
I am a DIY Creator supported by this channel's audience
to put out concepts for people to view.
Modify your boat at your own risk.

[jusgibs]

I've learned more in the last 13 minutes than I have in my entire life about wiring. I always seem to let it get to me and overcomplicate things. This made it a breeze to understand. Simple actually. Thanks!

[ernestpaul]

Am looking to get a used boat that will definitely become a project. The boat is 33 years old so I am going to redo every system in it to include the electrical wiring, gauges, pumps, convert to LED lighting thru-out and generally whatever it needs. I am medically retired so as long as I am above ground, I will have and make time to work on the boat. Even if I go before the boat sees the water again, I will pass it on to my brother who is a fisherman. It is also therapy. Thanks for providing an easy to use diagram. I am mechanically inclined and have put together 4x4's and a few other things. Wiring seemed to be my weak area, may because of the intimidation factor. But it should go smoothly now. Thanks again.

[getgoodusa]

Just inherited a 1978 sea nymph fishing machine and need to figure out the trim tilt wiring, now I want to rewire the whole thing and add more lights. Your came out super clean good work

[newzealandfortrump]

Small but important point ... follow standard DC wiring code and use RED for the positive and BLACK for the negative.
You can also purchase some flexible plastic conduit that you run all the wires through and makes it much tidier and easier to keep compartments clean. Your video was easy to follow.

[AlIsUpOutdoors]

Electrical work is an absolute nightmare for me. Thanks for breaking it down as simply as you did on here. I’ll probably end up watching this video a few more times but I have a good idea in my head now.

[michaelargento]

This is the best, easiest to understand video I’ve ever watched on general boat wiring. You gave me confidence to rewire my boat. (Several gauges don’t work). I’ll check out your store. Thank you'

[vaughnhetzel]

Very informative, I’m buying an old boat and want to rewire the entire boat as soon as i get it. This video was a huge help!

[SrcapGoblin]

Great video. I didn't even know there was a difference in the wire. I just got my first boat I'm a 44 year old car guy and planned on doing my boat like a car. Thanks for teaching me and saving me some future headaches.

[nicholasfrancis]

Rewiring my project Aquasport boat. So basically I should buy the box with ground and power running through it as a fused thing. So if I’m wiring my boat gauges to motor, I should run the positive gauge wire from gauge to the box and have it go from box to engine, and then have the negative ground out in the box. Just making sure I understand. This video helped a lot and made me feel more confident. Thanks

[michaelberglund]

Excellent video! This will really help me planning and executing the installation in my sailboat which I'm restoring. This video saves me a lot of thinking! Many thanks!

[markbroussard]

Great video! minor correction: Electrons flow from the negative side of the battery to the positive. Thanks for sharing!

[waden]

Holy smokes....i think our son and i can actually rewire (or at least clean things up a bit) on our boat now. THANK U VERY VERY MUCH!!!!

[michealmcintosh]

Finally a decent video that is easy to understand, thanks mate

[adamcox]

Michael Lopez. Great videos. Just wanted to tell you about my boat build. Its a 16' john boat side console. I put in rear deck with gas and battery compartment behind two seats and a bait well. The bait well is led lit with two pumps. If im fishing skinny water i can use one pump to recirculate the filled bait well or if im fishing deeper water i can run mu fill pump and switch my recirculate pump to discharge for continuous fresh exchange. I have another casting deck up front that covers my 24vdc battery system for my trolling motor with storage for life vest and such.. For lights im running led NAV, Anchor, Green underwater lights, green bait well light, and 2x 2k lux spot lights up front. The boat is powered by a 40hp outboard with dedicated battery and bilge pump. I originally this project 3 years ago. I only got to use it a hand full of times befoe i was forced to park it. The trailer colapsed during a hurricane and my wife fell ill needing a few surgeries. ( she is very well now). Im excited to say that im almost finished getting the boat back together. With a new to me trailer and fixing some problems with the motor i just took her out for a test run last weekend. She runs great. Cant wait to go fishing. Im so proud of the boat and all the work i put into it. I learned so much from the TBN community and others like it. Thanks for doing these videos. Keep up the great work.

[imbroke]

This was a fantastic video! I just bought a Pond Prowler 10, AGM battery and a 40 Endura Max. For the last several weeks I have been watching vids of mods and knew I wanted to plan ahead for things electrical. This makes my planning a whole lot easier.

[jusry]

Just picked up a 16' x 6' wide flat bottom I'm excited for your videos and to get started on my project

[itsalexn]

Bought the low temp solder connectors off your Amazon store and they are awesome. So much better than standard butt connectors. Thank you!!

[jasongreen]

These videos are great. Again. Saving people money. By people i mean me .

[dskize]

great video. I was able to clearly see what it will take to wire up my boat. other videos have been too long...long worded and very confusing. thank you!!

[gsman]

Been looking for a long time for a video that would explain it to a slow guy like me! :) Thanks!