Hayabusa Powered Can-Am X3 Build #hayabusa #canam

preview_player
Показать описание
Not sure what's going to happen with this overall - but its something I've wanted to do for several years now!
Рекомендации по теме
Комментарии
Автор

I am 4 seconds in and I had to comment. I had a gen 1 in my single seat car and I have been wanting to do another build...Ok, back to it.

deranged
Автор

I've already done it to my rzr..6 speed sequential..with the H L N R..gearbox..it absolutely screems..oh and its still 4x4

jaygtgarage
Автор

Very cool project! Looking forward to it!

RaceRebuildRepeat
Автор

Aprilia is an Italian motorcycle and scooter manufacturer, founded in Noale, Italy, by Alberto Beggio.

al
Автор

Awesome concept, I will subscribe. But with that being said, Those Yamaha yxz1000r with paddle shift sound amazing and rev high and your able to turbo and build that engine to make big power. I know this will be a different animal due to the yxz suspension being horrible. But your main things you wanted where a better sounding, high Erving engine with a real paddle shift tranny

Clearbrowser
Автор

Do you have a video of you driving it? That would be cool to see driving it

Airgunpro
Автор

Genial por fin un vídeo.. Llevo 4 años pensando como se podría instalar un motor Hayabusa .. Saludos cordiales desde Patagonia Chile

premiumyt
Автор

What about a chain in a oil bath to keep it from overheating? can you build a sealed case around it to keep the oil in?

coreyfincham
Автор

Diesel won't hurt the injectors. If anything, it's more lubrication. The fuel pump shouldn't have enough residual that it causes an issue. First prime and crank will get rid of it.

yamahaSHO
Автор

Contact either Grind Hard plumbing company or cars and cameras, they both have done builds with that engine

ronstorey
Автор

Hey awesome idea…. I have a friend who used a twin turbo hayabusa in a stream liner bonnaville car. The engine was making around 1000 hp. They engineered the whole car from scratch. It’s not an X3 but he may be able to shed light on some good soultions or steer you in the right dissection. They have since broke it and replaced with a toyota engine. Let me know in a reply if you want to talk to him and I’ll put you in touch with him…. Good Luck

geofferyshanen
Автор

The first 8 min is just talking about it. Let’s get in to it already.

tborkman
Автор

I think a chain to belt like a big cruiser streetbike or a carbon belt drive to the track like on the new snowmobile

FunAdventuresImp
Автор

Its missing bad check the plugs do a psi test it might be the diesel fuel in it let it run some more after it cools down hope this helps ya out !

rickybailey
Автор

I can’t offer any build help but I’m on my second X3 and tossing you a sub so I can follow this awesome madness 😂

joekearney
Автор

I saw videos 10 years ago of a Busa swap in a RZR.

hhipoolman
Автор

Use a temperature gun to check the exhaust manifold temp on each cylinder to see if those injectors wake up.

rachelmatt
Автор

Maybe look at those Harley belt drive units with the 4 inch belt.
I'll be here the entire build 👍😀

chrisgoetz
Автор

have you considered a YXZ drivetrain? paddle shift with 4wd and diff lock

Springerr
Автор

3:30 minutes in and i gotta ask lol, Why not just buy a yxz and put a factory turbo on it?

AboutaMileAdventures
welcome to shbcf.ru