MN82 LC79 Short steering angle?

preview_player
Показать описание
Upgrade Servo Motor
Replace Steering Rod

Product Link

21g DSPower Servo Motor
Рекомендации по теме
Комментарии
Автор

How wonderful that you share your knowledge! Thank you for letting us know the compatible parts and how to make improvements to this incredible truck. It is very difficult to find parts and know if they are compatible, I would waste a lot of money on this and I wouldn't know how to do it. Thanks a lot!

sage-mann
Автор

One of the french YouTubers mentioned this in his unboxing video, he's using the second hole of the servo

daijoubu
Автор

On a servo steering arm you have the most power in the inner hole. The further outside you place the rod, the more angle you get but less power is transfered. I think that´s why they chose inside hole with the standard servo.

ScoobyToursXL
Автор

I did the steering mod too, makes massive difference! And so simple

bombitobornRC
Автор

Excellent upgrades and tips! I plan on purchasing this model soon. I'll order the servos at the same time.

MysticRiverRC
Автор

That leaf springs are to soft. A hard spring on the shocks could solve it
Good ideia, the new servo arm 💪 😉

Fortes_RC_Adv
Автор

The axle knuckle restricts the steering. I found going anywhere past the second hole down from stock didn't gain any more steering angle than the 3rd position.

Rockerrobin
Автор

This video helps me a lot since im newbie here

vinzpunisher
Автор

On front, I see some tyre biting during full turns on uneven surface (when respective shock get depressed and tyre travels towards the chassis)

mikunjrathwa
Автор

You could put a set of nuts in between the axle and axle trust then you can lower the steering link to the bottom hole but yes the steering upgrades are better then the plastic ones awesome video thanks 🍻

joshmueller
Автор

Thanks for another awesome clip!
Is the steering mod also applicable for the MN78?

joakimbehrendt
Автор

Nice gain, but still not a stellar turning circle. Could the link lengths or the knuckles be modified to further improve that, or is a different axle required?

steverolfeca
Автор

Thanks for making this video! Great help for noobs like me. Btw, would you recommend the dspower servo for the mn128? Thanks man! More power!

daveryanaquino
Автор

Hello, thanks a lot for this guide! I've made the same change (same servo) but when steering is full left/right, the car slows down and starts "tugging". I need to increase power a lot. Please, advice what is wrong. Thank you very much in advance.

rovor
Автор

May i ask the link or website on where can i order the steering rods..thank you..amazing..😄👍

reyjr
Автор

First thing i did, before even putting the battery in, was to change the position on the horn. Same with my 99s. Am i the only person who HATES the transmitter though? That little white bit on the front is hideous

josephoneill
Автор

My servo is broken it can go forward and backward but it can’t turn the wheel so should I change the servo?

waveamg
Автор

I initially ordered the Surpass hobby 17g which appears to have even more force but slower (which is a positive point for our usage?) but then it is not waterproof so I end up also ordering the DSPower 221g lol, I will have both to compare haha

daijoubu
Автор

can we change the receiver and transmitter? i want to use tx4 transmitter for my mn82
is it possible?

robertosalucan
Автор

Can new servos fix that short steering issue without changing steering arm?

astroplen