Gold recovery from IC chips BGA & electronic devices.

@MakeGold Gold recovery from IC Chip electronic devices.

[MakeGold]

Is gold in electronics worth extracting?
The short answer to the question is: yes…there is profit in recycling gold (and other precious metals) from electronic devices. The longer answer is that it definitely requires resources to get this resource (the old adage, it takes money to make money, if you will!).
Sourcing your electronic scrap will also be something that you need to plan in advance of startup. While electronics have precious metals, its in teeny tiny amounts so you need a LOT of scrap to make this venture worthwhile. Similarly, with the need to have labor on the inbound and the outbound, the commodity produced will NOT cover 100% of your costs, so you’ll need to establish the right fee to support your operations. Often you’ll be competing against non-profit or subsidized operations in this realm so being able to differentiate your service will also help you to be successful.

[dr.a]

It’s amazing to see how small and intricate the wire are

[منصورضخیمی]

عالیه لطفا اطلاعات بازیابی نقره فیلم سی تی اسکن رااز دهید

[vijusri]

Some ppl say its not worth..but its seriously worth of wt we r spending here its just a few ml of chemicals tat costs less than gold so its worth. think abt the quantity if ur making with 1kg ic chips u get 2.3g of pure gold jus imagine 100kg of ic chips u can make 230g pure gold the rates of gold and chemicals may very.. Thanks for the video.. Brother

[edsecce]

You made 0.07 grams of gold at today's price, 52 dollars a gram, it would be about 3.6 dollars but I guess the real purpose of the video is to teach how to extract gold from those chips, great job!

[ideasytnow]

What is the cost of the sulfuric acid compared to the value of the gold?

[geneburlette]

It looks like there may be gold under the glass where the wires attach.
Do you know if it is gold or copper?
Thank you for all your videos!

[kenjett]

This all looked good up until right after the nitric acid step. Instead of tweezing the wire off just put it all in aqua Regia and dissolve the gold and precipitate it out with SMB. That way you get all the gold. By tweezing the wire your leaving the gold solder and when you melted that bit of gold that was not all the gold from those chips. That little ball of wire was way to small for what I seen pulled off. I believe they was some deception in the amount shown recovered.

[crazycreations]

Do not boil the IC chips. It will cause loss of gold. Rather wait for 5-6 days

[Bartolobot]

can muriatic acid be substituted for sulfuric acid?

[sametozturkler]

Bardaga koydugunuz kimyasal hakkında bilgi vere bilirmisiniz selamlar

[pierreqiu]

Do you think using AR will get more gold out of this

[vasapitta]

hi how much time it should be boiled with sulphuric acid with 80-90 degrees

[skyryder]

what about the other pieces you put to the aside, that looked like gold also on the under side of the chip in a square of gold.

[mimmodipierro]

che percentuale di acido nitrico stai usando per questo processo?

[javiervalenzuela]

3.39 dollars of gold assuming it's pure. This being for demonstration purposes I'm guessing normal working quantities and yields are much higher with similar amounts of chemicals used?

[EzequielGomez-ef]

Cuantas horas pusiste eso a hervir porque con una hora eso sf desase

[lawalmohammed]

Please Sir is it pure gold that can be sold out?

[Hardeur_World]

what sulfuric acid do you use? 30 ° / 38 ° or 96 °

[The_Regolino]

How many kg of scrap to arrive to this result?