Magic Crack Filler - Real Life Test

Magic Crack Filler - Real Life Test

[OT_DopeOldARMY]

I just spent several hours this weekend using this product, and I have learned that using a flat surface item (I just used a birthday card I had) to level out the product in the crack and a brush to brush away the excess without going over the crack does the best job. The crack doesn’t disappear unless it’s a true hairline. Wider cracks don’t…but honestly, the point is to prevent it from getting worse…and it looks a lot better than the cracks did. I’ll be interested to see if the shading around the cracks goes away over time. I also think you could go over the areas around the crack with a firm bristle brush and scrape away the excess product to lighten up the color difference some. Overall, I’m pleased. It’s super easy to use, and you start to understand how best to apply it.

I do recommend taking time with it and using the spout that came with the bottle rather than just dumping it. Precision application does make it look better in the end.

[AlienLegendmovie]

I think it will work for what I need. The depth of cracks vary. So like sand in a hour glass it has to fill in. I think a little over the crack will eventually wear down to even. Nice demo. I've done a few YT demos to and my dog got into them. Thanks for the vid.

[guitarman]

I can still see the crack from the start. Should you keep filing and brushing until the crack is not visible and "even" with the major area around the crack itself? There has to be a threshold to where no more crack will show when the depth is filled, then spray the material and follow up until it is virtually blended. My concrete is three years old and still looks whiteish, and after pressure washing some moldy places looks as new. Any response from users or the narrator is welcomed. Yes, I'm OCD and want it "right"!

[JeffreyFeyh-rbxk]

The guy doing the demo on the info commercial used a scraper instead of a brush.

[JGarAries]

Works better with a card or plastic putty knife. The paint brush just brushes it all away 🌬️

[JBRewskie]

Will the magic crack filler absorb sealer and cooling for an indoor flooring. Also will it polish. Thank you!

[dmaddc]

I just ordered some and then found your test. I’ll post my test when I get a chance. Thanks

[snackymcgoo]

Interesting how the product continued to work its way down (perhaps very fine grain) after initially looking nice and flat. I suppose that is a very good trait for the product to have. I am thinking if I use this product, I will take a hammer and protective layer and tap all sides to assist the product working its way down. Time will tell how strong this is relative to actual concrete.

[mark]

Magic crack filler was my nickname in high school.

[AyalaJD]

Has anyone compared this magic crack filler against polymeric sand? Is it the same thing essentially? Better? Worse?

[JAR-xuel]

This question might sound weird but. How is the crack going? I’m interested in the product performance.

[mikegardner]

is there a minimum temperature to work with?

[buythedip]

You needed way more to start with if you can see the crack when you first start spraying you're way too thin

[MrCites]

The best part about this product is you can refill it for free if you live near a beach

[petemisc]

Well, definitely does not hide the crack

[DurangoRT]

You would have been better off with polymeric sand if that's not what that is.

[bchluvrxyz]

Yeah, to hell with the instructions. Instead of cutting the nozzle to apply, just unscrew the cap and waste a whole bunch of it. And use whatever you want to apply it, forget the demo.

[JBRewskie]

Also don’t use a brush. It will eject everything from within the crack. NEXT REVIEW VIDEO! (Fail)