how to build a bar top rail

how to build a bar top rail out of knotty pine. cutting the rail with a table saw and router table and router done the easy way

[BBQLord.]

I made a 10 foot arm rail out of Red Oak, for home bar, that turn awesome. Your how video taught me how to do it. Thank you so very much!!!

[kblend]

I understood every part except what you did with the router and hand plane. Looks great!!!!

[lark]

Thank you so much! I made a 10 foot bar rail. I’m a machinist, I did the work after hours at work on a Bridgeport milling machine. Ok, the cove I had to do on the table saw, but otherwise, it came out fantastic!

[danthemanbruin]

Thanks for showing how to setup to cut a cove. Lots of videos on this topic, but yours explains it the most clearly

[easypeasy]

I refinished our basement over a year ago and built an eight foot bar in it. I bought a cheap ($59) piece of laminate countertop to (temporarily) put on top of it until I had some extra time and money to upgrade it. Looked at stone and found it to be way too expensive. I was going to fabricate a concrete one, but changed my mind because of the work that was involved. I found your video and chose to tackle this project. I couldn't be more happier with the final results. Your video was very instructional and super easy to understand. I wish I could show you a picture of it. You'd be proud. Thanks for the video.

[SquirrelsForAll]

Great video! Man, you're like the Rob Zombie of woodworking. Thanks for creating and sharing. :)

[jackjamieson]

Thank you my guy. Really appreciate you laying this out

[UncleLouigisfamousyt]

I'm fairly new to woodworking. Just want to say that your skill really shows and you are inspirational.

[joeysowell]

Going to build a bar in our basement. I was wondering how to do that rail. Wow you made it look very easy. I have some wood working skills from working my late father whom did working a lot as a hobby. Hoping ours turns out as good as yours. Thanks

[inishun]

THANK YOU FOR THIS!! building a party bus in Nashville and was going to have to pay $400 to buy from Home Depot and wait 10 days. You’re the best!!

[michaelmagaruh]

That's amazing you made that in your shop. I just got one priced out mahogany for a restaurant, they usually use a moulding machine with special knives. It was $800 for the custom knife profile and another $200 to cut it for 32'. You saved a good deal of money doing it on your own, great job!

[romansrealm]

I want to build a bar and your great videos are very helpful. Thank you sir!

[bartosullivan]

Watching your skill was truly inspiring. Have you done this with some hardwoods like White Oak or Walnut? If so, did that make things more challenging?

[TheBriggsyboy]

Thank you for sharing this content, it was just what I was after. I did change the dimensions to make it work for me. I also found that multi passes with the table saw worked well instead of the router. However mine was only 4 foot. Thanks again

[carlosjackson]

That was an AMAZING VIDEO!!! I'm not sure I have the confidence to try it just yet, however, if i do i hope i'm successful. THANK
This is a true how to video from a very skilled person, I'm not sure how anyone who's viewed this didn't like and subscribe, SMH

[BSnydr]

Great stuff. Any concerns with making the edge with walnut?

[larrystone]

Good video enjoyed it Be safe God Bless

[jormawails]

that was so cool did you make one pass with the router and use the hand plane on an angle for the part you couldnt use the table saw Thanks

[joeysowell]

I have been watching how you make you bar rails. Do you do a rounded corner for the rail or mitered corner. Do you have a video for that.

[georgehoffman]

Looks great just what I was looking to do