How To Erase All Remote Codes From LiftMaster Garage Door

In this video I show you how to erase all of the stored codes from your LiftMaster Garage door opener. This will erase the keypad keyless entry where you enter your pin code, all Remotes, and the my Q devices. You might want to do this if you think someone had a remote and can access your garage, or if you just moved into a new house. You might want to do this just to have peace of mind that everything is erased and you can program the Remotes you want programed. Thanks for watching!

AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.

Amazon:

Intro/Outro Music: RKVC - Tropical Thunder

DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.

[jamesu]

Sweet, just had a B&E so this was the answer

[coopsdad]

How do I actually clear the memory out of the remote? I accidentally programmed 2 doors on one button. I do not want to erase the codes on the actual opener as I have 7 remotes that I would have to reprogram.

[craigwilliams]

Is it possible to erase the codes in the remote only?

[jarrettgorin]

How do you clear the memory of the CLICKER?? One of my clickers has two (2) different codes stored to one (1) button. t is opening both my gate AND my garage door opener. I have no way to get rid of the duplicate codes stored on the clicker. I have already tried completely clearing the opener motor unit of all codes and reprogramming the clicker to it. But this does not clear the duplicate code stored on the single button on the clicker. There are no instructions on how to do this anywhere. When I google "clear garage door clicker" (or remote etc.) it just comes up with videos like this one on how to erase remotes from the opener. That is not what I need to do. Do you have any ideas or experience on how to basically reset a CLICKER to factory default unprogrammed etc?

[RebelSon]

Thank you. I have an old Craftsman Liftmaster. Unfortunately, my neighbor's remote got paired with it while I was pairing a new remote of my own. In an attempt to reset, I have pressed and held the learn button, but it doesn't go out, not after 7 seconds, nor 30 or more. And it is not resetting. Is there another way? The only identifying number I see for this model is 41A3625.

[RB-gtbf]

Question: if I lost one opener and clear out the codes for the lost remote and the remaining remote...can I then go back and just pair the one remaining remote?

[erikrn]

Thanks for great content. Can I remove homelink that connected with car?

[Garage]

Ok so I’ve done this to try and reprogram my remotes. It works for a few min. Then I step out of the garage to try and use my door opener. It no longer works. Thoughts?

[angelinas.]

My learn light never comes on unless I'm pressing the button on the clicker

[signedup]

Is it possible for someone to have a remote which transmits the same signal as the one I use; Thereby opening my homes garage door after I cleared all the codes and learned my remote back into my opener? If so, how would I get around that issue

[garywilliams]

If I erase all the codes will I be able program a new remote?

[greatscottvoicemedia]

Hi, thanks for the video. We have 4 of those remotes that we want to de-program since we are using the key chain style now. When I erase the old ones will it erase the key chain remotes as well? Thanks again!

[andrewmiller]

Hold down yellow learn button until light comes on then goes off . Or skip to 1:60