TS100 accessories and soldering tools (my favorites) - BEST FOR LESS

-------------
🔶 You can also use the following affiliate links and BOOKMARK the links at the end of this description - I get a small kickback if you decide to buy something and it costs NOTHING extra to you.
-------------
_________

It has been 2 years since I bought my TS100 soldering iron and have been recommending it ever since.
If you don't have a good soldering iron and are thinking of getting one, look no further. The TS100 with a few basic accessories will most probably cover all your needs for soldering FPV hardware, both on the bench and on-the-go.

During this time I have tried a lot of accessories and soldering tools. Now it is finally time to share with you my personal favorites, tried and tested.
Check the detailed list below and let me know in the comments which is YOUR favorite soldering accessory or tool!

These are MY FAVORITE accessories for the TS100 and soldering tools I cannot do without!

👉 TS100 soldering iron

👉 Bundles of TS100 and accessories

👉 TS-D24 tip

👉 TS-C4 tip

👉 TS-I tip

👉 TS100 colored shell

👉 XT60 to DC Jack cable

👉 Simple stand for the TS100

👉 Stand with sponge

👉 Brass wool tip cleaner

👉 Kester Flux Pen

👉 Solder wick

👉 Solder pump

👉 DIY TS100 case

👉 TS100 cases

👉 Helping hands

👉 Blu tack

👉 Reverse tweezers

👉 Forceps

Legend:
BG = Banggood
HK = HobbyKing
GB = Gearbest
GET = GetFPV
AE = AliExpress
EB = Ebay

👍 PLEASE SUPPORT the MuteFPV channel:
-------

👍 Save and use these convenient BOOKMARKS before purchasing new goodies (bookmark the SHORTLINKS in your browser):

THANK YOU in advance for your support!

As an Amazon Associate I earn from qualifying purchases.

Song: Evan Schaeffer Music Studios - PORTAL

#muteFPV
#TS100
#Soldering

[BlackDuckAttack]

Must like this video, just got a ts100 and these suggestions were most timely

[IsaKocoglu]

I love this! I just purchased a TS100, after watching a Daniel Tartaglia video, and did not realise it came with no power supply. As I was searching for TS100 power supplies, I came across your very useful video.

Thank you once more. Great video.

[anikidwolfy]

for a carrying case i have gone for a vape pen case that allows me to store everything soldering in there; iron, solder, power cable, stand (bulldog clip w/ 1 arm reoved and placed upside down in jaw), extra sodering tip, xt60, deans, tamya (prewired), xt60 to deans adapter, heat shrink, thick/thin wire, electrical tape, blue tac, homemade third hand. basically its everything in 1 pouch excluding power source so when i grab it out in the field i dont have to go searching for all the bits.

[FOFOsporteg]

Like the video, simple and informative.
Thanks for making it.

[sirroger]

gold mate, pure gold. Nice job as always. Will buy via affiliate links, for sure. thanks for your work!

[DimplePoji]

Tip and stand = my fav and useful accessory

[shaneintegra]

I just ordered a TS100 from BangsGood. Can't wait till she gets here <3

[jedics]

I think this just pushed me over the edge to buy a TS100, I am a noob but I keep finding jobs that need soldering, this is probably over kill but my 20w cheapo is just junk.

[SatrioArifWicaksono]

having hard time soldering smd with TS-B2 which one better for smd soldering with TS-I or TS-D24 or maybe TS-BC2

[pitotopuk]

Are the tips shapeable by the user?
Thanks.

[AtlantaTerry]

Banggood has discontinued the TS-100 soldering iron. Cases, tips, etc. are still available.

[iameliop]

The best videos ever!! Thank you so much.. keep going!!

[blackmennewstyle]

Currently only using the TS-D24 for soldering almost everything indeed :)
Great video as always boss!
All the best for 2019 <3

[DjordjeRadakovic]

Thanks for solder wire suggestion. I use proskit one from hobbyking, it is really good, but quite often too thick since they have only 1mm. My TS100 collects dust since I got TS80

[GUILLERMO.NESPOlO]

first !!!
love your new intro !!!
i like your carring case !!!

[richardrhoads]

I use a bench suction cup vise thing to hold stuff. The helping hands I bought were cheap and sucked.. Need some of those blue ones like you have. Also what was the purpose of the heat shrink in the carrying case?

[emperorSbraz]

i got the kit with the TS-I rather than the OTHER useless conical tip. it's not performing as expected as the internal geometry isn't fully copper to the tip i presume.
TS-C4 is a nuclear reactor. TS-D24 is my spirit animal.
i made the stand with a paperclip. :)

[SharkStudio]

What do u think about the "black chrome" soldering tips @BG? I would like to buy a TS-D24 tip but there are two types of it.

[MCsCreations]

Fantastic stuff, dude! 😃
Added some things you showed to my wishlist! 😊
BTW, I remember seeing a video where the guy makes a TS100 case with a small piece of PVC pipe... But don't remember how he did it. 😕
Well, I guess I'm getting old. LOL

[jasonpan]

Reverse tweezers my favorite!!! i think the real use is for making jewels.. i saw it in every jewel shop!! hehehe