HOW TO INSTALL CAM BEARINGS IN YOUR CHEVY 350 ENGINE!

Installing the cam bearings and rebuilding this 50 year old Chevy 350 (CSB) engine block at HOME! No machine shop needed! Installing camshaft bearings

Check out all my other links:

[craigmcdonel]

I think that your presentation technique is much better than most others. Thanks.

[diciple]

Damn... Probably the easiest explanation. Thank you for that.

[charlesnelson]

Very cool
Thanks
62 here
Rebuilded motors back in the 80s retired now
Time to play
Well done

[jeanlawson]

OTC makes a cam bearing tool that you don't have to hammer them in more like a puller...it's smooth 😎

[larryanderson]

I never put the last cam bearing in from same direction, turn block around, that way centering cone is always used

[greenhillgarage]

I have had my cam bearings installed by my machine shop, but he is so busy that it can take a month or more just to get on his schedule.
I subbed!
Keep the great videos coming!

[Schlipperschlopper]

Best bearings are King bearings you can get cheap by Jegs in house brand boxes.

[Anarchy-Is-Liberty]

Check it out ladies!!! It's the golden shaft of doom!!

[flinch]

When you inspect the annulus area before driving in bearings, what depth and width is normal/acceptable [assuming less than 7k rpm operation]? Most people forget these, but spotting a casting/machining issue early could save a rotating assembly.

[Oldfarmersgarage]

I am running a stock replacement cam and everything is just stock on my motor. I tried my best to get them as close as I could to the old ones but some of them were off. I made sure the feed hole was lined up with the groove but the holes are not clocked quite right. Should I knock them out and reclock them?

[johnseggerman]

DON"T clean it out with water after bearing instal to remove shavingsl!!! Just Air thanks.

[SOLDOZER]

Spraying brake clean on metal shavings does not make them go away.