Xecuter NAND-X and FreeBOOT Install guide

This is a video I made on how to install the Team Xecuter NAND-X into your console. I will use coolshrimps jtagtool to read the nand and install FreeBOOT back onto the console. I am still using a pre-release NAND-X for this video so it will not represent the final product. The reading of the nand and installing FreeBOOT is all one shot, meaning not video cuts, from the video you can see that with the NAND-X you can read the nand and install FreeBOOT in around 7 minutes. What are you waiting for go order your Team Xecuter NAND-X NOW! Be sure to add in a couple extra jtag kits so that you can quickly install this kit into more consoles in the future.

[ITzZxKiiNG]

Thank you so much for this tut I had no clue what a nand x kit was I saw it on ebay. But you explained it very thourly threw your last vids. Im glad this is out its alot easier then the lpt way.

[hustlert]

@CarolinaGamer thats excellent bro, you got some really good vids, Keep up the brilliant work, iv learned alot thanks for all the help to the modding community your a great asset buddy!

[CarolinaGamer]

@TEAMxFNG No you will have to do the JTAG wiring for non xenon boards. The NAND-X comes with a quick solder board for both types of jtag set ups. So if you get a NAND-X then you will have everything you need to jtag the console besides a soldering iron and pc stuff like that.

[FLBoyFromTha]

You can use LPT but the NAND-X with pinheaders i highly recommend because i have a Jasper JTAG with a Nand size of 512mb and with LPT it takes 7hrs to read the full Nand and 20mins with the NAND-X :D

[CarolinaGamer]

@AMLpwnz Yes the final version comes with everything that you need to jtag a console, except pc and soldering iron. It has the jtag portion included as quick solder boards.

[CarolinaGamer]

@eoiscool yes the NAND-X comes with everything that you need to jtag one console.

[CarolinaGamer]

@generictuber001 I know what your talking about they have to be soldered, you need to go to team xecuter forums to get the install guide for the non-xenon boards. They nand-x jtag kit connects to the same part of the console as the normal jtag install.

[CarolinaGamer]

@hustler6t9 This is doing it from scratch with a virgin console. And this is 0.32. You can use usb if you already have a modded box, if you mess up the usb install the NAND-X comes in handy and will be your beast friend.

[CarolinaGamer]

@iFromBroa Yeah the kit is to jtag the xbox. And you can find a link on the xecuter forums.

[CarolinaGamer]

@SoFroStyx Solder every point on the pads because the points also hold the board in place along with the tape on the back.

[CarolinaGamer]

@AMLpwnz The NAND-X comes with jtag boards that will work on each type of console.

[CarolinaGamer]

@kongakonga You have to type whatever command you want to use. If you do not know how to do the commands, you should use jtag tool it's point and click.

[CarolinaGamer]

@kongakonga Most of the time that is the soldering, you need to double check it, and also make sure you have the drivers installed.

[CarolinaGamer]

@DigitallBrass The Nand-X is a great product, it makes jtagging stupid easy.

[liamgreen]

Thanks alot. i have bookmarked this :).

[CarolinaGamer]

@KreatiionModz The quick solder boards yeah your supposed to leave them on.

[Snoopey]

hmm so after this you'll be able to run unsigned code from your hard drive? Or does that require a custom dash like back in the xbox 1 days?

[CarolinaGamer]

@SocalgamingHD The NAND-X comes with everything you need to jtag a console.

[CarolinaGamer]

@JamesJohn83 if you have to use them then i doupt u can remove them without messing something up, just solder directly to the board, and get some diodes.

[CarolinaGamer]

@IIFRoZeNxX Yeah once you complete the JTAG install process your kernel number will change.