Hospital Network Design & Implementation Using Cisco Packet Tracer | Enterprise Network Project #7

How to Design and Implement Enterprise Networking Project on Cisco Packet Tracer
Hospital Management Network Design and Implementation Using Cisco Packet Tracer
Technologies implemented; Hierarchical Network Design, ISPs, VLANs, Inter-VLAN Routing (Switch Virtual Interface SVI), DHCP Server, Port-Security, SSH, NAT Overload(Port Address Translation PAT), ACL, Site-to-Site IPsec VPN, WLAN (how to configure access points), Static IPv4 Addressing, Host Configurations e.t.c

For any assistance WhatsApp: [phone]

PREVIOUS PROJECTS

[gurutechnetworks]

1. Social Media Links

2. Direct contact Links
🔢 WhatsApp: [phone]

3. Training Materials

[hamdullahsabit]

Hello dear sir, I am really appreciation of your hard working that you'v prepared advance networking projects to the student of networking. once again thank you so much.

[kylegrove]

This is what I needed to see…a real life scenario. Thank you 👍🏾

[charleswahome]

Great demonstration. I only have one request, please do a project which includes bgp and glbp protocols. I will really appreciate.

[ashokrana]

I m very thankful to join with your channel ❤❤

[rudyguillen-ws]

Good job, and good project. You have many projects to learn. Many thanks for everything. Peace and good

[thelittle]

I m very thankful to join with your channel

[samn]

Hello. Thanks for these lessons! Question: Shouldn't the Multi Layer switches be connected via LAG for redundancy? Thanks

[hedii]

In sh crypto ipsec sa, encaps is 7 but decaps is 5 instead of 6. Does that mean there was some mistake in what I did? Or is it fine as it is? 2:58:12

[chakablazy]

Great stuff. I think you should provide a link to the Scenario document to be downloaded.

[msalameh]

Excellent job, only thing, which is not correct, shouldn't do connection in first place between hq and branch routers directly, and vpn to be done over internet. also multiple vlan on same switch through trunks more practical than each switch for one vlaan. thanks for the efforts

[AnilKumar-tmfq]

Nice effort to clear the network concept

[shuaibhassan]

great Sir Benard. it is very impressive work...

[KoKoNaing-vwgt]

Server Site Switch why you configure int range fa0/1-2 switchport port mode trunk ? DHCP Server int is fa0/2 ? 0/3 ?

[L-arc]

Hello sir, I’m having problems when trying to replicate this part 1:55:00 it is always appearing the message “ request timed out”and no packet was delivered do you have any idea why this is happening?

[mdsitare]

Thank you for sharing your knowledge with us sir.

[alittax]

Hello. How reliably does Packet Tracer (PT) simulate these topologies? As far as I know, PT is only useful for CCNA-level knowledge, and because it's a simulator, there may be some bugs in it which are not in real devices, and the other way around as well (which means a configuration that works in PT may not work in real life the way it does in PT). Thank you.

[rohullahjafari]

Hi sir, Actually I have done all the configuration, everything is working very well except IPsec, I mean Vlans, intervlan, DHCP, Port-securtiy, NAT, ACL. But IPsec is not working. I mean I have done OSPF then I tested ping and everything was good but the moment when I configured IPSEC, it could not ping.
can you please tell me whats the problem?

[montimachethe]

Greetings Mr, i have just joined the channel now ... i am just asking a way to download the cisco file on hospital network design and implementation thanks

[funnylamb]

Sir can you please tell why you have used two multiswitch there