Balluff BN508-105-z015 In Studio5000 with Add-On Instruction

With Balluff themselves having limited information about the BN508-105-z015 IO-link module, I thought what better time to help than now so I made this video to share the resources that I found.

Please watch to full video to make sure you understand the small details, from my findings of using Balluff, every bit helps.

Once you sign up then check your email & verify your account.

Get EDS File:

Get EDS File:

Here is the AOI sign-up:

Then you need to download the AOI for the I/O block you are using.

0:00 Setting up a Generic Ethernet Module
2:55 Looking at the Controller tags
3:30 Adding BN508-105-z015 module using the EDS file
4:50 Important Balluff set up information
5:22 Difference in Generic setup & the EDS file setup
6:20 Registering the EDS file in Studio 5000
7:40 Where to find the EDS field on the Balluff website
7:55 Easy search on Balluff's website
10:20 Getting the Add-On Instruction from Balluff
14:55 The Balluff Add-On Instruction PDF
15:20 Adding the Add-On Instruction to the PLC program
16:20 Programming the Balluff Add-On instruction
19:25 Setting the active ports along with other changes
22:00 Closing statements
23:00 Recommended videos for you

I hope it helped.

Thank you for watching the video.

Learn, Implement, Succeed

Visit:

Other social media:

#IOlink #BalluffEDS #Balluff

[brett]

This is incredibly helpful. Thank you!

[Yeroc]

Great video, step-by-step is the best way to teach anything. I was following along and the part# cannot be found on the site. Do you have to be a company to register and follow along with the video to obtain the EDS and AOI?

[seeigecannon]

Nice video as always. Question: when creating a generic Ethernet module with a configuration size of 0 there seems to always be a SINT[500] array in the controller tags. Do you know how to avoid this? Sure, 500 bytes isn't much, but it would be nice to know how to get rid of this if I ever needed to add 100 modules for some reason. Thanks for what you do.