Nonlinear analysis of Concrete Diaphragm Wall subjected to Bi-Axial bending moment using ANSYS 2021

preview_player
Показать описание
ANSYS tutorial for Nonlinear analysis of Reinforced Concrete Diaphragm Wall subjected to bi-axial bending moment for Deep Excavation using ANSYS Workbench 2021

Link for Geometry file and APDL command:

==== Contents of this video ====
00:00 - Intro

02:19 - ENGINEERING DATA
02:50 - SPACECLAIM GEOMETRY
05:06 - FINITE ELEMENT MODEL SETUP
12:43 - ANALYSIS RESULTS

---------------

My ANSYS Tutorial Playlist :
  1. Thanapon Buamongkol
  2. ANSYS
  3. Nonlinear Analysis
  4. Static Analysis
  5. FEM
  6. Finite Element
Рекомендации по теме
Nonlinear analysis of 0:17:45

Nonlinear analysis of Concrete Diaphragm Wall subjected to Bi-Axial bending moment using ANSYS 2021

Design and Modeling 0:21:29

Design and Modeling Issues Related to Diaphragms of Tall Buildings

Nonlinear Frame Analysis: 0:07:02

Nonlinear Frame Analysis: How to Visualize Results (Fiber Element Analysis with VecTor5)

Analysis and Design 0:23:04

Analysis and Design of Reinforced Cast-in-Place Concrete Diaphragms

SAP2000 - 20 0:29:48

SAP2000 - 20 Nonlinear Shear Walls: Watch & Learn

Nonlinear static analysis 0:47:50

Nonlinear static analysis of masonry structures: current and refined assessment methods

Top-Down Excavation with 0:12:10

Top-Down Excavation with concrete diaphragm wall and slabs in our DeepEX 2015 software

Nonlinear Analysis Part 0:42:54

Nonlinear Analysis Part 2

Webinar: Structural Assessment 0:50:11

Webinar: Structural Assessment of an Existing Heritage Structure using Nonlinear FE Modeling

Session # 5 1:05:11

Session # 5 Apply Nonlinear Static Analysis and Nonlinear Dynamic Analysis using ETABS

OSG 27-Dr. Tatjana 1:12:39

OSG 27-Dr. Tatjana Isakovic on Modelling Reinforced Concrete Walls Using Force-Displacement MVLEM

Seism on structure 0:02:07

Seism on structure reinforced with non-linear steel at max. 14 g on all 3 axes - ANSYS WB Transient

Diaphragm Wall with 0:09:25

Diaphragm Wall with Struts 2D Model Design

ANSYS Tutorial: Nonlinear 0:52:17

ANSYS Tutorial: Nonlinear analysis of Heavily-Reinforced Concrete Structure - Part 1

Proportioning Strength to 0:19:49

Proportioning Strength to Limit Building Movements of Slender Core-Only Towers

44 - Diaphragm 0:13:08

44 - Diaphragm Flexibility, Structural Irregularities and Selection of Seismic Analysis Method

Novel, Nonlinear Finite-Element 0:13:04

Novel, Nonlinear Finite-Element Analysis Methods for Load Rating of Concrete Girder Bridges

MEMBRANE VS SHELL 0:09:02

MEMBRANE VS SHELL IN ETABS PART-I

Rigid Diaphragm Analysis 0:11:41

Rigid Diaphragm Analysis with Hand Calculations

Fully Nonlinear Dynamic 0:00:58

Fully Nonlinear Dynamic Analysis of a Modern RC Core Wall Building Using the BTM-in-FEMultiPhys

ROLE OF STORY 0:06:07

ROLE OF STORY RANGE IN SEISMIC ANALYSIS PART-II

Assessment of a 0:22:23

Assessment of a 12-Story Code-Compliant Reinforced Concrete Special Moment Frame

Diaphragm Wall with 0:09:56

Diaphragm Wall with Struts 3D Model Design

2. ASCE 41- 0:06:14

2. ASCE 41- Two dimensional mathematical modeling-part 2-diaphragm classifications

Комментарии
Автор

could you please make us a complete video on modeling of steel shear wall panels (including studs, trucks anchor bolt...etc), especially the contacts between them. I found some videos on Youtube but they all used Abaqus.
Warm regards

hassinaziou
Автор

Thank you, you are the best
could you please share D-wall setup or the research paper?

eslamahmed
Автор

Congratulation Dr on this great video. I have a questions:

1. For reinforcement, you assigned it as link/truss. But in Ansys 2021, there is function of reinforcement. I saw a video from DrDalyO, he used this reinforcement function instead of link/truss. Can you explain on this?
2. Does the CEINTF command is used because you assigned the reinforcement as link/truss? If I am using reinforcement, do I need to use the CEINTF command?
3. Until now, I am still face difficulty to understand the SOLID65 command, each script. I saw your video on understanding the SOLID65 command but still, confuse. Do you have any good reference to understand it?

Thank you.

Pinky_Gaming