Mirka ANGOS - How to change the tooling head

The unique ANGOS ARG-B 200 is the first cordless grinder from Mirka. It can be used with a variety of accessories in grinding and sanding metal, cleaning after welding, surface conditioning, cutting and deburring and paint removal. Follow the steps below to change the sanding accessory.

1. Remove the battery from the machine.
2. Be careful not to press trigger.
3. Lay the tool upright with the trigger facing you.
4. Select the supplied 14mm spanner and locate the square edge on bottom spindle shaft and place spanner.
5.Then select supplied 17mm spanner and locate the clamping nut (directly above spindle shaft) and place the spanner.
6. Hold the 14mm spanner and 17mm spanner whilst turning the 17mm spanner anti clockwise on the clamping nut to undo the collet.
7. Remove the tooling accessory from the clamping nut then add tooling accessory as required to clamping nut.
8. Hold the 14mm spanner and 17mm spanner whilst turning the 17mm spanner clockwise on the clamping nut to tighten.
9. Ensure the accessory is secure before using the Mirka ANGOS.

[okafka]

Maybe consider a spindle lock in mark 2.