Troy-Bilt Pressure Washer Troubleshoot and Repair

In this video we check out a Troy-Bilt Model 020296 pressure washer that was locked up and leaking water from the pump. We end up installing a new aftermarket pump to solve the problem. Here is a link to the pump I used.

[TheShop.]

Dude that was a perfect video. No extra fluff. Just the right stuff for what I needed. I have the exact model that is leaking and stopped pressurizing. We'll see what I find. Thanks

[karenbearden]

This is one of the best videos I've watched on the subject. I'm about to go out and attempt to get the water pump off. Thanks very much for the help.

[lhpfla]

Excellent instructional video. Got all the camera angles perfect and the sound too. BRAVO!!

[aaronmoravek]

I picked up one of these washers for $40 with the same issue. Pulled the pump, found zero oil gear oil. Add oil, cranked it by hand, reassembled, and works like a champ again. If I were a betting man I’d bet your would of started working too.

[BoxSocket]

This describes precisely what I need to do to my pressure washer. Thanks. Also: cool C-10 in the background.

[mutlah]

Crusty and crunchy! Great vid Sir! Keep cool/warm. Love the insect sounds of summer. Going to look at my freebie pump now.

[russellgilmore]

Thanks for leaving the Link to the pump you purchased from Amazon. I guess some folks don’t read the details you to so carefully included!😂

[polarbear]

I have a Troy bilt pressure washer I used the previous fall. Put it away for the winter, wouldn’t start. Cleaned out the carb and it started, only to find out the manifold was cracked. Replaced the pump and manifold, and works like new! Recommend running these out of gas whenever you use them.

[maccurtinequipmentservice]

Strong work sir.

I’m working on a washer for a customer right now. Would be nice to fix it in-house, rather than a specialist, after I go over the engine.

[Baghdad]

Excellent tutorial. I will take your video and attempt to repair my power washer. Thank you.

[peacelovesoultrain]

Man that is the exact same model i have doing the same thing. Thank you so much for this video i will now go buy a pump.

[eduardoespinoza]

I have the same pressure washer that was given to me, so this video really helps. Thanks.

[Matt-bdor]

I bought same model years ago, used it a few times, loaned it out a few times, pump was cracked, I always kept it indoors, in the winter, so eventually got a new pump it’s been setting for so long, I’m tinkering with it now, water doesn’t seem to be flowing into the pump and out the wand, can seem to un loosen the hose from the wand..lol I’ll figure it out

[johnstock]

Great video thanks for sharing and I hope it's still working after 2 years for the time of this video.

[jjwdesign]

Awesome video! Thanks Bryan. Your detail was very much appreciated.

[darlenetomblin]

I have a Troy bilt. 2700 given to me. Someone broke a piece off the water replacement head. Which I’m going to replace. I can’t connect the won hose. Should I just replace the whole pump?

[mahnkejj]

Appears all I need is a new seal on top of the pump. It is leaking oil, but I can’t find it anywhere. Everything is still working fine, just left with an oil spot on the ground after using.

[ZimaletaMotors]

Great video, I learned allot from you, I just got a pressure washer my self, was $25 bucks and it’s really clean with a bad pump, I think I can fix it using your video, thanks allot I subscribed, my pressure washer is different so I will make a video for my channel fixing mine

[alanappleby]

so your unloader didn't require any adjustments? worked right out of the box?

[rhshel]

outstanding! thanks for the video. 84 bucks not bad where did you get the pump?