Virginize BMW Cluster for Aftermarket Digital Cluster retrofit!

Unfortunately the aftermarket digital instrument clusters for BMW are not made to perfectly work with BMWs , so in this videos I will try to to do something about that, my plan is to add an original cluster inside the dashboard to maintain the BMW functionality , the theoretically will work but practically is a different story and seems too be more challenging.... if you want to see what I've done you need to watch the videos

Part 1 !



If you want you want to support me :

The white Grease that I'm using is "Molykote EM-60L"

Amazon Affiliate, Commissions Earned : if you buy from these links you'll make me rich :))



Multimeters and probes :


Panel Clip Pliers for removing clips and harness :

Tesa Highest Quality Heat Proof Engine Compartment Wiring Tape :










For filming /editing I'm using :



#bmw #movidiu
!!! Ops it looks like you've reached the bottom !!!

[saynotothegreatreset]

You have to apply for the NASA job, that's an outstanding job .
Well done 👏

[Alpejohn]

I never thought the Y connection for the MOST would work, thats pretty crazy!

[EmilsLasmanis]

You are crazy, I would never had thought of doing something like this. You are a blessing for this community.

[LKDubey-vbdm]

Dear sir, I need your help in a problem which i m facing after replacing a used EPS IN 525D F10 . After the replacement i took a trial of about 5 kms & it works fine but after the trial upon closing the bottom cover, when started the car EPS was very hard like manual steering . Applied ISTA+ THE EPS module is RED . Upon somebody advice i tried the flexray module initialization but this failed everytime . Could you pl guide me on this ? Regards . LK DUBEY

[Hancock_nl]

I like the analytical approach to solve this problem. Not one which i would have come up with. Well done 👍
But to be honest, this style of dashboard layout is totally not my thing. I need to see gauges with swaying needles.
Guess i'm getting old 😎

[MrFryfish]

Do you have an email address to ask you a question about ISTA?

[myproduction]

thank you very much for this video. how do you know which one CAF for selection?

[MrWalidAloui]

I have the same problem with this cluster. Where are you from? Can you do the same with mine to works ?

[tyroneclinton]

Instead of a CAN filter would a CAN clamp not work to not actually send data back into the can system but only read it

[sebawinowp]

Jesteś moim Masterem w tym co chcę zrobić w swoim BMW. Szacunek.

[jorhanfernandez]

Do you sell these adaptors to plug in with the aftermarket digital cluster?

[dobrisanmihai]

Never use more than 350 360 degree on your soldering iron/station cause you will destroy the tips and burn the flux very fast

[MrFryfish]

Crazy stuff that you have the knowledge about.

Great.

[albaniakosova]

Well done 👌please, if you find the solution why those 2 errors are appearing in ISTA, keep us updated ✌

[Calimero-]

remarkable impressive to say the least. WOW

[harisvikingii]

Nu mai umbla la Kilometraj, se prind astia pe aici ca esti Roman. 😅

[AndreiAB]

That fibre optic connection gave me chills :))

[jrma]

So, just for my understanding. You “duplicate” in parallel, the cluster, enough to communicate with cíc and rest of the modules

[carolvalicek]

Jos pălăria!!! Baftă in continuare!! Salutari

[radusofronici]

Good to see you back. Do I understand correctly that the CBS is in the cluster?